Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 21 to 40 of 55

Thread: Baltec Bubble Bobble Pachislo

  1. #21
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    I watched the odds setting video thank you. The machine I have has no key to reset the machine on power supply. It has to be something to get it out of this mode and into playing mode.

    Thank you,
    Chris

  2. #22
    Pachi Puro FTKServices's Avatar
    Join Date
    Aug 2006
    Location
    Finally in Tennessee
    Posts
    2,159
    Thanks
    2,955
    Thanks Received
    1,419

    Default Re: Baltec Bubble Bobble Pachislo

    I just got done talking to Chris about his machine. We were on about to find anywhere on the inside of the machine that has or might have had a key switch. the machine is stuff in odds mode. I am not sure what the top left switch with the words ON next to i, is for. It is possible that is the key switch that we are all looking for. It might be defective.
    Does any know if the normal key switch is normally open or closed when you are in play mode. I don't have any of my machines here to check.
    Eddie thanks for the video, that is what gave me the idea.
    SPIN LUCK #2973 *** KING CAMEL *** SINBAD ADVENTURE *** AUTOMATIC *** WILD WOLF *** DEATH VALLEY *** NEO PLANETT *** THE CYBORG SOLDIER 009 SP *** DESTROYER

  3. The following user says "Thanks" to FTKServices


  4. #23
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: Baltec Bubble Bobble Pachislo

    if it has a key switch it would be on during odds setting and off during regular play.

    my one baltic machne had the odds key in a silver box on the upper right top section of the case.
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  5. #24
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    I found out that the key rest was change out to a switch. It's the large black flip switch with the white dot on top. Maybe this will help out a little bit.

    Thank you

  6. #25
    Pachi Puro FTKServices's Avatar
    Join Date
    Aug 2006
    Location
    Finally in Tennessee
    Posts
    2,159
    Thanks
    2,955
    Thanks Received
    1,419

    Default Re: Baltec Bubble Bobble Pachislo

    Were you able to check that switch to see if it is defective. So far from what I have read it should be in the off position for game pay mode. Since we tried it in that position, it makes me believe that it is broken.
    SPIN LUCK #2973 *** KING CAMEL *** SINBAD ADVENTURE *** AUTOMATIC *** WILD WOLF *** DEATH VALLEY *** NEO PLANETT *** THE CYBORG SOLDIER 009 SP *** DESTROYER

  7. #26
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    How do I test the switch to see if it's faulty or not?

    Thank you,
    Chris

  8. #27
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    I found the skill stop machine manual that came with this machine. It says push the machine power switch to the off position then push the reset switch to the on position. On LED display once you are at your desired skill levl push and release the handle start knob 6 times this locks the desired skill level in place. Push the reset switch to the off position. Do not turn machine power switch off . Machine should be ready to play. I've done this but doesn't work. What is the yellow things for on the power supply? What's next for me to see if it will work?

    Thank you,
    Chris

  9. #28
    Pachi Puro RaymondV's Avatar
    Join Date
    Nov 2006
    Location
    Mt Clemens, MI
    Posts
    4,152
    Thanks
    5,557
    Thanks Received
    4,107

    Default Re: Baltec Bubble Bobble Pachislo

    That should work.
    Does it do anything at all?
    Does the payout number go off?

    This should not be this complicated.
    Where do you live?, maybe there is another member that is close to you and would run by and check it out as a last resort
    Pachislo - Super Bingo-King Camel-Mephisto-Neo Pharaoh Zetz-Nangokusodachi-Mu Mu World DX-Super BlackJack-Death Valley-Gin Gin Maru-Power Jump
    Pachinko - Fever the King-Monster Village-Top Gun-Thunderzone-Casino Fever-Super Sea Story

  10. #29
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    It didn't do a thing it still has the skill level in the win window. It doesn't say insert medal. I'm in Diamond, Illinois which is just South of Joliet, Illinois. I just am lost now. I've went through these steps and nothing seems to work. Thank you for all the help maybe it will work. At least I hoep so.

    Chris

  11. #30
    Pachi Puro RaymondV's Avatar
    Join Date
    Nov 2006
    Location
    Mt Clemens, MI
    Posts
    4,152
    Thanks
    5,557
    Thanks Received
    4,107

    Default Re: Baltec Bubble Bobble Pachislo

    That is a little far for me to come take a look at it, I am north of Detroit.

    Lets run through this again step by step -

    #1 - Main power off, Reset switch on
    #2 - Main power on
    #3 - Set payout rate
    #4 - Depress handle several times
    #5 - Reset switch off

    Machine should be ready to play

    Try it again, try the opposite way on the reset switch if it does not work
    Pachislo - Super Bingo-King Camel-Mephisto-Neo Pharaoh Zetz-Nangokusodachi-Mu Mu World DX-Super BlackJack-Death Valley-Gin Gin Maru-Power Jump
    Pachinko - Fever the King-Monster Village-Top Gun-Thunderzone-Casino Fever-Super Sea Story

  12. The following user says "Thanks" to RaymondV


  13. #31
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    I've tried both ways and nothing happens. The skill level is still in the window.

    Thank you,
    Chris

  14. #32
    Pachi Puro FTKServices's Avatar
    Join Date
    Aug 2006
    Location
    Finally in Tennessee
    Posts
    2,159
    Thanks
    2,955
    Thanks Received
    1,419

    Default Re: Baltec Bubble Bobble Pachislo

    1 of the yellow switches should be a reset after a big bonus ( I think) not sure about the other. The only way to verify if the switch is working is to use an ohm meter. You would have to remove the power supply & open the case. once you have access to the 2 wires on the switch, you connect the leads to each wire. one way ( on position / off position ) you should have 0 ohms the other infinite. If thats what you get then its good, otherwise its bad. If it is between, you may have to remove 1 wire. If you are electrically handily this is fine, if not then find a friend that is.
    Hope this helps.
    SPIN LUCK #2973 *** KING CAMEL *** SINBAD ADVENTURE *** AUTOMATIC *** WILD WOLF *** DEATH VALLEY *** NEO PLANETT *** THE CYBORG SOLDIER 009 SP *** DESTROYER

  15. #33
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default Re: Baltec Bubble Bobble Pachislo

    It looks like a Sammy power supply. Turn the power off with whichever switch controls the power. Then flip the other switch into the opposite position and reapply power.

    You credit window should display a number between 1 and 6 representing your odds. The button on the power supply should change this number. If not, look for a small round button on the door someplace.

    Once you've managed to change this number to the desired position, 1 thru 6, the tap the joystick a few times and flip that reset switch back to the original position.

    If this does not work, once you've turned off power, don't flip that second switch, reapply power and see if you have the 1 to 6 display that way.

    If neither work, your SOL bud, sorry.
    Meanwhile, somewhere in Oklahoma.

  16. #34
    Pachi Puro RaymondV's Avatar
    Join Date
    Nov 2006
    Location
    Mt Clemens, MI
    Posts
    4,152
    Thanks
    5,557
    Thanks Received
    4,107

    Default Re: Baltec Bubble Bobble Pachislo

    Well my friend,
    I am not sure what the hell could be happening there.
    I am not sure if this is a bad machine or what, as none of my machines have ever had this problem. (knock on wood)
    .
    Maybe another member that is in your area will see this thread and offer to come and take shot at it for a couple of beers or something

    I would keep trying in the meantime
    Pachislo - Super Bingo-King Camel-Mephisto-Neo Pharaoh Zetz-Nangokusodachi-Mu Mu World DX-Super BlackJack-Death Valley-Gin Gin Maru-Power Jump
    Pachinko - Fever the King-Monster Village-Top Gun-Thunderzone-Casino Fever-Super Sea Story

  17. #35
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    Thank you everyone for the help. I guess I'm SOL. I have done everything that this manual says and what everyone else has said and nothing seems to work. Maybe I wasn't meant to get this machine to work. I guess if I can't get it to work then it will sit in my basement. This machine totally has me upset. I have come close to taking a hammer to it, but I didn't.

    Thanks
    Chris

  18. #36
    Corporate Destroyer Lddrizzt's Avatar
    Join Date
    Nov 2004
    Location
    NW Pennsylvania
    Posts
    5,665
    Thanks
    1,084
    Thanks Received
    3,178

    Default Re: Baltec Bubble Bobble Pachislo

    Try replacing that reset switch, they are only a couple bucks, and that will rule out the switch.

    This is my personal opinion, or of the voices in my head, and are not meant to reflect the opinion of this board.

  19. #37
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    Thank you where do I go to get this piece? Also do you think it may be this piece that is causing problems I think it's broken its behind the lever that you hit to get reels going. The balck piece was attached to the metal, but I don't know. Anyone aroudn me willing to help me fix this and I will give them some money or beer.

    Please help me.

    Chris
    Attached Images Attached Images

  20. #38
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: Baltec Bubble Bobble Pachislo

    it looks like it needs a complete joystick assembly.

    I think your stuck with a parts only machine
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  21. #39
    Green Mile rollercoaster79's Avatar
    Join Date
    Jun 2007
    Location
    Diamond, Illinois
    Posts
    118
    Thanks
    42
    Thanks Received
    41

    Default Re: Baltec Bubble Bobble Pachislo

    Why would it need a whole new joystick I've already replaced the reel spin handle this piece is the only thing I see that looks like it's broken. Is there anyoen around Joliet Illinois that can help me get this running or find parts for it. If you have this piece that is broken for sale let me know.


    Chris

  22. #40
    Importer 7mileslots's Avatar
    Join Date
    Dec 2004
    Location
    Wisconsin
    Posts
    86
    Thanks
    0
    Thanks Received
    19

    Default Re: Baltec Bubble Bobble Pachislo

    I am in Racine Wisconsin and have pachislo machines at 7 Mile Fair every Saturday & Sunday from 9am to 5pm. If you would like and are ever up this way I could take a look at it for you. I also accept trade ins to. Thank you.

  23. The following 9 users say "Thanks" to 7mileslots


Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. Bubble Bobble on Ebay
    By luckydog in forum eBay - General Auction listings
    Replies: 5
    Last Post: 08-30-2007, 02:05 PM
  2. Baltec Banker 9 anyone have info?
    By Eddie in forum Model Talk
    Replies: 8
    Last Post: 03-27-2006, 11:35 PM
  3. bubble bobble pachislo
    By guest in forum Model Talk
    Replies: 10
    Last Post: 06-22-2005, 03:37 AM
  4. bubble bobble on ebay
    By luckydog in forum eBay - General Auction listings
    Replies: 6
    Last Post: 06-20-2005, 07:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •