Extending the payout hopper on top!

[Moparformances]

something like this was not to hard to build holds alloooooot of balls... the best thing is it takes the weight from the hopper and moves it to the frame.. of better yet a whole cabinet
DSCF3399.jpgDSCF3402.jpg

DSCF3636.jpgDSCF3637.jpgDSCF3631.jpg

[Calypso]

something like this was not to hard to build holds alloooooot of balls... the best thing is it takes the weight from the hopper and moves it to the frame.. of better yet a whole cabinet
DSCF3399.jpgDSCF3402.jpg

DSCF3636.jpgDSCF3637.jpgDSCF3631.jpg

Thats what I am talking about...3D printer or wood working...I would "dress it up" like I did my pachniko feet...But I want something like that.

Does anyone make them?

[Moparformances]

Thats what I am talking about...3D printer or wood working...I would "dress it up" like I did my pachniko feet...But I want something like that.

Does anyone make them?

i made my own

[Doc Kaos]

I built in a larger hopper when creating a cabinet, then just put a central vac tube down into the plastic bin https://goo.gl/photos/rp39FJEs68Q5iLSr9
Built the same cabinet for my Star Wars as well. Only about $50 worth of plywood for the whole cabinet.

[Calypso]

I built in a larger hopper when creating a cabinet, then just put a central vac tube down into the plastic bin https://goo.gl/photos/rp39FJEs68Q5iLSr9
Built the same cabinet for my Star Wars as well. Only about $50 worth of plywood for the whole cabinet.

That’s awesome! Thanks for sharing. I may look at cabinets down the road! So there is nothing inside that the machine “clips” into , correct? It literally just sits in there?

[Doc Kaos]

That’s awesome! Thanks for sharing. I may look at cabinets down the road! So there is nothing inside that the machine “clips” into , correct? It literally just sits in there?

I put screws through the side panel to hold it in place. I think otherwise when you opened the door it would just fall over.