Betty Boop stopped spinning the reels

[slodog6]

I have a Betty Boop which was working well and then the betting buttons and go lever stopped working. I did a full reset including the odds adjustment but no luck. There is a red LED on the circuit board under the reel window which is now on. This is the board that the buttons and knob connects to. At first I thought the go knob was bad but it worked for the reset. The red LED is above the ribbon cable going to the Go knob/lever, The LED is labeled "D26". I'm new to Pachislo games and am having a ball.

Any Ideas, I hope I'm not going to hear - circuit board . Thanx

[slodog6]

After reading the older threads I tried the buttons to see if there were LED reactions. They all did except the Max Bet button. I bet i can't buy one at radio shack.

[Drunkenclam]

Might just be stuck or a damaged wire of faulty connector. Just double check everything before going shopping. Try and give the button a clean as well. Good luck

[Wayne-Ooo]

Drunkenclam is absolutely correct. It's a stuck button.

Led D26 only lights when the Max Bet button is pushed.

So if it is lit, it means that your Max Bet button is stuck down.

[slodog6]

Thanks guys, I'll take it out and wash it in alcohol. No Ian, not scotch. you guys are great. I found a little place that sells these things occasionally, I paid $100 for betty, send me a pick list and I will keep an eye out for you.

[Wayne-Ooo]

$100 is a great price for a Betty Boop machine!!!