Lumina frame error
I recently received a lumina frame and several cells in the mail. The cells seem to work fine in my other Lumina frame. The frame I just received had been modified to be cyclical. The plastic strips that had been installed to make it cyclical had come off in shipping - so the frame and ball payout didn't work properly. I took the ball payout mechanism out, scraped off the remaining hot glue and reattached the strips In manner that it pays out and drops balls out the back as it was originally intended. Now the problem is - every time the machine goes into a reach or a jackpot, it goes to an error screen and the animatronics pout momentarily like the machine is starting up. I took a photo in hopes that someone reads Japanese or has some idea. P.S. - The machine was doing this behavior even before I fixed the strips back to the original setup. Any advice or even speculation would be appreciated. Thanks!
Reply With Quote
