Results 1 to 14 of 14

Thread: Need a little help

  1. #1
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Need a little help

    I have this bally slot that was working perfectly. After being gone for six months it does not pay the first cherry. All of the rest of the payouts are correct. Any help would be appreciated.
    Attached Images Attached Images
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  2. #2
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,239
    Thanks
    67,837
    Thanks Received
    44,845

    Default Re: Need a little help

    It's probably just mad at you for being gone so long!!

    "Blowing smoke rings at the moon."

  3. The following 2 users say "Thanks" to MrGneiss


  4. #3
    Blind Shooter Steve2000's Avatar
    Join Date
    Nov 2015
    Location
    Brisbane
    Posts
    75
    Thanks
    8
    Thanks Received
    86

    Default Re: Need a little help

    I don't know how that one works but the early Aristocrats had like pins that went through slots I think. If it has slots maybe it is blocked? Is it electronic, maybe the contact for the cherry is dirty?

  5. #4
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Need a little help

    Yes it is electronic. Any idea other than contact cleaner.?
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  6. #5
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Need a little help

    Anybody have an idea exactly where the cherry point would be and how to fix it. ???
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  7. #6
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Need a little help

    Quote Originally Posted by MrGneiss View Post
    It's probably just mad at you for being gone so long!!

    If you takeaway the bots their are not alot left and I do post when I have something to contribute.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  8. #7
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,332
    Thanks
    51,523
    Thanks Received
    30,710

    Default Re: Need a little help

    Quote Originally Posted by Lt Teddy View Post
    I After being gone for six months it does not pay the first cherry.
    Quote Originally Posted by MrGneiss View Post
    It's probably just mad at you for being gone so long!!
    Quote Originally Posted by Lt Teddy View Post
    If you takeaway the bots their are not alot left and I do post when I have something to contribute.
    Sorry I can't help with your technical query, i have no experience of those kind of machines, but hope other members can offer some help.


    P.S. I think MrGneiss was just referring to you being gone away from your machine too long, not PT!

    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  9. The following 3 users say "Thanks" to hanabi


  10. #8
    Blind Shooter Steve2000's Avatar
    Join Date
    Nov 2015
    Location
    Brisbane
    Posts
    75
    Thanks
    8
    Thanks Received
    86

    Default Re: Need a little help

    Keep playing it for a while if it has oxidised from lack of play it might clean itself after a while?

  11. The following user says "Thanks" to Steve2000


  12. #9
    Sandwich Shooter scottie banks's Avatar
    Join Date
    Jul 2011
    Posts
    326
    Thanks
    0
    Thanks Received
    506

    Default Re: Need a little help

    Looks to be E.M. not electronic......
    Pull out the reel bundle and clean the wiper board,also could be a broken wire off the back of the wiper board
    Scottie
    SCOTTIE

  13. The following user says "Thanks" to scottie banks


  14. #10
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Need a little help

    You are talking the three wiper boards on the back side of the reels?
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  15. #11
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Need a little help

    I cleanned those with no results.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  16. #12
    Sandwich Shooter scottie banks's Avatar
    Join Date
    Jul 2011
    Posts
    326
    Thanks
    0
    Thanks Received
    506

    Default Re: Need a little help

    Yes thats the ones.......i dont think its a big problem (easy fix ) because its just one payout and all the others work....
    so the problem is just with one circuit that has to do with the cherries....its not telling the hopper to pay out
    check on the wiper boards to see what color the wires are for the cherry circuit and trace them from one end to the other end......sometimes you can have a cold solder on a conection ....it looks like its soldered but its not makeing a good connection.....
    anotherthing line up the reels to pay out on the cherry..then move the reel by hand up and down and see if that makes the conection....the finger might be bent a bit and not makeing a connection on the button on the wiper board
    Scottie
    SCOTTIE

  17. The following 3 users say "Thanks" to scottie banks


  18. #13
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Need a little help

    I got it. Thank you. Just needed cleaning on thefirst reel board.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  19. The following 4 users say "Thanks" to Lt Teddy


  20. #14
    Sandwich Shooter scottie banks's Avatar
    Join Date
    Jul 2011
    Posts
    326
    Thanks
    0
    Thanks Received
    506

    Default Re: Need a little help

    Glad you got it going....keep those wiper boards clean lol
    Scottie
    SCOTTIE

  21. The following user says "Thanks" to scottie banks


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •