loading problem
I am currently fixing and cleaning my third vintage.They are a model A a model B and a model C.On all 3 i have to push the balls towards the entrance to the ball loading mechanism.I have cleaned the trays and the mechanims several times.Is this normal on these Machines?Thank you for your help.
Re: loading problem
No, not normal. They should flow freely if everything is clean, clean pivot points and ball paths. Maybe the brass pivot points are tarnished/dirty?Originally Posted by rockmike
Re: loading problem
simple question is your table level??
sorry had to ask.. seem like a strange problem to have.. i have had machine that the balls were slow to roll. Or need a bit of help from time to time but its a rare problem..
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: loading problem
table is level I,ll keep cleaning and see what happens Thanks
Re: loading problem
On the BC you can open the tray or take the tray right out and watch from behind what’s hanging up the feeder.
Just hold the flag down..
get all the black crap off the tracks and walls..q tip and windex
DON'T FEED THE
Re: loading problem
Would you please post some nice , Clear photos of the area's in question here on this thread ? Many thanks
and biscuits
When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS
Re: loading problem
ok I will try cleaning again. Thanks all for the response!
Re: loading problem
Dirty balls perhaps? I've had that happen to me and began pulling the two hairs left in my head, till one day I washed them in a solvent based degreaser and viola! Not noticeable to the naked eye but it worked.
Re: loading problem
I think you might be right on thew dirty balls.All the machines were from the same place.I cleaned the machine but not the balls I added new ones but never cleaned the old ones which were dirty >Ill try tonight thank you!
Re: loading problem
others that play your Machine will enjoy them being clean
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: loading problem
Thanks for the help.I recleaned the mechanims and all the pachinko balls.Things are now working great!
Posting Permissions
Reply With Quote