Stand for machines to go on - questions

[mxfaiman]

I haven't had a stoage problem using 2x4 and laying them sideways. Just note that is when you lay them sideways that things will need some adjustment for play and to rotate the machines so they interlock which gives you more storage space.

008.jpg

[Mrtoad]

I haven't had a stoage problem using 2x4 and laying them sideways. Just note that is when you lay them sideways that things will need some adjustment for play and to rotate the machines so they interlock which gives you more storage space.

008.jpg

thanks Max. Is a little hard to tell, is it about every 3 feet you have a support going to the floor? Also your idea of rotating I might use. I have 2 ideas I am thinking of. One would be to build cabinets for each machine and store them in their cabinets. The other was to build cabinets that would stay permanent on top and as I rotate machines put them in the cabinets attached temporarily in them when in use, so would store the machines without a cabinet. The second option is my preference but not sure if possible to build cabinets that would hold any vintage machine. Are all vintages closes enough that a single cabinet could hold any machine?

thanks,
Mike