Results 1 to 3 of 3

Thread: Pulsar machine given to me won't work right

  1. #1
    Tokie Owens Vinjes's Avatar
    Join Date
    Sep 2008
    Posts
    1
    Thanks
    0
    Thanks Received
    0

    Post Pulsar machine given to me won't work right

    Ok, here goes, I got this machine from a friend, says he had no key, but I was able to open from slot on bottom, the machine when you turn it on just starts the hopper running, and if I put coins in I get an error constant beeping, and a lit comes on saying Trobleshoot" in front, problem is all the wrtting is in I guess chinesse/Japanesse charaters, not sure which, and I hope I don't offend anyone with my ignorance. When I insert a token, it just rejects it and it comes right out though the payout slot at bottom without going to hopper or giving me a credit, I do have a nice digital cammera, and can take picture if anyone needs who can translate all switches and buttons for me, there are 2 momentary buttons one green one red, a toggle switch (on and off) only one I figured out, a keylock, and two small switches near top of controlbox that say on/off
    Any help at all would be greatly appriciated
    Thank You
    Vince

  2. #2
    The Diceman Chrisdice's Avatar
    Join Date
    Sep 2005
    Location
    Seaford, Delaware, United States
    Posts
    3,358
    Thanks
    1,973
    Thanks Received
    3,979

    Default Re: Pulsar machine given to me won't work right

    Pictures are always a good place start.In the mean time, look for and check the hopper dump switch. It normally looks just like the power switch. Turn it off.
    Chris Dice
    Yo 11 any 7

  3. #3
    Sandwich Shooter Banzaitrooper's Avatar
    Join Date
    Jul 2008
    Location
    Wisconsin
    Posts
    382
    Thanks
    357
    Thanks Received
    526

    Default Re: Pulsar machine given to me won't work right

    Also, Welcome to pachi talk!

Similar Threads

  1. Ebay Auction : Vintage Nishijin Pachinko Machine needs work
    By mxfaiman in forum eBay - General Auction listings
    Replies: 8
    Last Post: 08-19-2011, 07:10 AM
  2. fluorescent lights on front of machine don't work
    By mrdoobie.com in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 11-14-2010, 04:19 PM
  3. Pachinko Machine for sale, needs some work - $40 Newland
    By cardwwi in forum FB Marketplace, Craig's List and Other Listings
    Replies: 0
    Last Post: 05-13-2010, 05:38 AM
  4. needs work - bally's coin 25Cents slot machine - $200 miami
    By SlotsRfun in forum FB Marketplace, Craig's List and Other Listings
    Replies: 0
    Last Post: 01-31-2010, 07:23 PM
  5. Daiichi Machine - needs work
    By Snazzy81 in forum Vintage Pachinko
    Replies: 13
    Last Post: 10-08-2008, 10:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •