Sagging Hinges
One thing I noticed (and not surprised) about my Pachinko machine that the hinges are sagging:
Machine.jpg
Sag1.jpg
Sag2.jpg
I thought it was important to shim this up, so I dug through my scrap metal bucket and came up a piece of 1/4" thick angle iron. I cut and fitted a piece (had to cut an angle slice to fit under the shooting mechanism):
Shim1.jpg
Shim2.jpg
Shim3_0.jpg
Shim3.jpg
Nothing attaching the shim to the case except friction. Not really noticeable from the outside either.
Paul
Reply With Quote
