Indiana Jones ball reward feeder not working

[Erniesan]

Thanks for all the replies so far. I finally got a chance to mess with it some more. I cleared out all the ball jams and took most of the ball feeder apparatus apart to see if there was anything stuck. Got it back together and decided to swap out Indiana Jones for Julie.

I am getting error code #7 on the back of the machine. Googling that suggested I adjust the metal ball stopper thing... No luck with that.

I also noticed a loose 2 pin red and white wire connector that I can't find any place to plugin. I'm not sure if it ever was plugged in. I can share some pics later if needed.

[Peteybob]

Thanks for all the replies so far. I finally got a chance to mess with it some more. I cleared out all the ball jams and took most of the ball feeder apparatus apart to see if there was anything stuck. Got it back together and decided to swap out Indiana Jones for Julie.

I am getting error code #7 on the back of the machine. Googling that suggested I adjust the metal ball stopper thing... No luck with that.

I also noticed a loose 2 pin red and white wire connector that I can't find any place to plugin. I'm not sure if it ever was plugged in. I can share some pics later if needed.

Code #7 is the system saying that your payout tray is out of balls. The system can remember that it was out of balls and needing more to finish the winning balls payout. You may need to refill the tray several times before the payout is completed and the "7" will change to a dash "-", normal state of operation. If your hopper is full then check the payout motor to see if it is running.

On my Julie and Vicky machines I didn't see the 2 pin red and white connector without pulling out the cells. The only ones I did see were for the speaker connections behind the front glass. Can you post some pictures please?