Page 1 of 2 1 2 LastLast
Results 1 to 20 of 40

Thread: Need help Identifying

  1. #1
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Need help Identifying

    I was looking to buy this machine, I think its a Cocktail Bingo by Ginza. I have searched and searched and come up empty. trying to see what the black middle section is. I'm guessing an LCD that interacts with game play.. anyone able to help out?


  2. The following user says "Thanks" to persichini


  3. #2
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,235
    Thanks
    4,680
    Thanks Received
    4,663

    Default Re: Need help Identifying

    Welcome to pachitalk! How about a picture of the back? It is an "early modern" machine. It runs on 14volts AC. It should have a transformer on the back for power. If not DO NOT APPLY 120 volts directly from wall outlet! It will do damage to the machine!

  4. The following user says "Thanks" to pachiwall


  5. #3
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    I've asked seller for more pictures, but no luck yet.. just trying to figure out some details on it before i make the 2 hr round trip drive.

  6. #4
    Kungishi CarlW's Avatar
    Join Date
    Feb 2011
    Location
    Sugar Grove, Illinois
    Posts
    1,538
    Thanks
    2,315
    Thanks Received
    3,432

    Default Re: Need help Identifying

    Think Pachiwall has a typo? 24V AC?

    Usually numbers spin in the middle part. Have to hit the correct combination for a Fever. Then the rectangular Fever gate opens.

  7. The following 3 users say "Thanks" to CarlW


  8. #5
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    i was told... "It powers up fine but then the balls don't consistently go through the shoots." not sure what they are referring to as shoots but i'm hoping its an easy fix... or i'm going to abandon the idea on this one and pick up a Nishijin model C.. what to do.

  9. #6
    Kungishi Spyder138's Avatar
    Join Date
    Sep 2014
    Location
    San Jose, CA
    Posts
    1,117
    Thanks
    3,394
    Thanks Received
    1,813

    Default Re: Need help Identifying

    Quote Originally Posted by persichini View Post
    ... or i'm going to abandon the idea on this one and pick up a Nishijin model C.. what to do.
    Buy both is the correct answer. Welcome to Pachitalk.

  10. The following 3 users say "Thanks" to Spyder138


  11. #7
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    @spyder138 LOL...

  12. #8
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    @carlw does it keep score any of wins?

  13. #9
    Kungishi CarlW's Avatar
    Join Date
    Feb 2011
    Location
    Sugar Grove, Illinois
    Posts
    1,538
    Thanks
    2,315
    Thanks Received
    3,432

    Default Re: Need help Identifying

    Quote Originally Posted by persichini View Post
    @carlw does it keep score any of wins?
    The machines do not keep track of the wins, you would need an "add on" counter for that. With the model C; the wins won't be massive...

  14. The following user says "Thanks" to CarlW


  15. #10
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Need help Identifying

    カクテルビンゴSX

    Oct 2000
    Ian #UKPachinko

  16. The following 4 users say "Thanks" to Drunkenclam


  17. #11
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,235
    Thanks
    4,680
    Thanks Received
    4,663

    Default Re: Need help Identifying

    Quote Originally Posted by CarlW View Post
    Think Pachiwall has a typo? 24V AC?
    Oops! Brainfart. Thought a warning was necessary!

  18. The following 2 users say "Thanks" to pachiwall


  19. #12
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Need help Identifying

    buy them both...

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  20. The following user says "Thanks" to Moparformances


  21. #13
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    I went ahead and bought both... the one in the picture was only $75 so I think it was a good deal... had some bubblegum jamming the shooter.. so they thought it was busted... need a good cleaning and I hope everything this game else works... lots of electronic parts...

  22. The following 5 users say "Thanks" to persichini


  23. #14
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    Ok so I've had some time to play with it.. Its way more advanced then i expected... Has ball sensors all over it with tons of wires and circuits. what i don't know is in the 3rd picture the machine flashes those lights with that number 7 above it.. is this normal function or an error of some kind.

    If i knew what manual to look at it would help a ton.



    20160629_061403[1].jpg20160628_194125[1].jpg20160628_222626[1].jpg20160629_061438.jpg20160629_061432.jpg20160629_061429.jpg20160629_061444.jpg
    20160629_061441.jpg

  24. #15
    Kungishi Spyder138's Avatar
    Join Date
    Sep 2014
    Location
    San Jose, CA
    Posts
    1,117
    Thanks
    3,394
    Thanks Received
    1,813

    Default Re: Need help Identifying

    The hope is that the 3 larger numbers total a winning combination, usually 3 of the same number but sometimes another combination may also trigger a win. Once 3 of a kind are hit the machine goes into fever mode, the little trap door at the bottom of the machine opens to catch balls and the machine pays off a large number of balls, probably 1200-2000 depending on the machine. I am not sure what the 7 is on your machine. Likely some kind of counter. I don't know anything about your machine, but sometimes a machine goes into a mode where it gives a certain number of " free" spins, meaning you don't have to hit the start pocket to spin the numbers on the display. Does the 7 change to a different number as the numbers change? You may want to read the sticky threads in the forum if you haven't already. They do a good job of explaining how to play, what the various features and functions are, and standard operations of a pachinko. Reading them will probably answer most of your initial questions.

  25. The following user says "Thanks" to Spyder138


  26. #16
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,333
    Thanks
    51,524
    Thanks Received
    30,711

    Default Re: Need help Identifying



    You might find these links helpful to you, they explain Modern Day Operation, what the main parts are called,etc
    and are especially useful if you are new to pachinko

    http://www.pachitalk.com/forums/local_links.php?catid=65&linkid=545


    http://www.pachitalk.com/forums/loca...=65&linkid=547

    And of course the members here are the best handbook / resource and are sure to help with any queries you may have

    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  27. The following 3 users say "Thanks" to hanabi


  28. #17
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    @hanabi

    Do you know what the flashing red lights in picture 3 mean? i an still play with them flashing.. i'm thinking its some type of error.. maybe its just an attract mode?

  29. #18
    Blind Shooter persichini's Avatar
    Join Date
    Jun 2016
    Location
    Tx
    Posts
    32
    Thanks
    14
    Thanks Received
    17

    Default Re: Need help Identifying

    I've seen the 7 change to a 6 but its back at 7.. the thing i question is the 3rd picture that shows the red lights those are flashing even when not playing the game.. its full of balls.

  30. #19
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,333
    Thanks
    51,524
    Thanks Received
    30,711

    Default Re: Need help Identifying

    Quote Originally Posted by persichini View Post
    @hanabi

    Do you know what the flashing red lights in picture 3 mean? i an still play with them flashing.. i'm thinking its some type of error.. maybe its just an attract mode?
    Quote Originally Posted by persichini View Post
    I've seen the 7 change to a 6 but its back at 7.. the thing i question is the 3rd picture that shows the red lights those are flashing even when not playing the game.. its full of balls.



    Sorry I'm not sure what the 7 means, is the game playing normally? are you getting payouts?

    I don't have this model of pachinko but hopefully someone here does and can post an answer
    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  31. The following user says "Thanks" to hanabi


  32. #20
    Pachi Puro lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    2,129
    Thanks
    1,494
    Thanks Received
    4,050

    Default Re: Need help Identifying

    I'm not sure how specifically your machine is supposed to function, they are all different. Maybe try searching youtube for a video of it in action? I can say it's completely normal for some digipachis with LED number "reels" to be constantly flashing even though nobody is playing.....they do this to attract attention to get someone to play them. My Vicky Chance machine flashes the LED numbers constantly when not being played.

  33. The following 2 users say "Thanks" to lotsoballs


Page 1 of 2 1 2 LastLast

Similar Threads

  1. Need help Identifying
    By exbee in forum Modern Pachinko
    Replies: 2
    Last Post: 07-25-2015, 11:53 PM
  2. Need Help Identifying
    By exbee in forum Model Talk
    Replies: 9
    Last Post: 05-08-2015, 12:14 AM
  3. Need help identifying
    By Bleedorange in forum Model Talk
    Replies: 11
    Last Post: 05-05-2015, 10:46 PM
  4. Need help identifying!
    By Swhitton25 in forum Model Talk
    Replies: 5
    Last Post: 05-17-2014, 11:29 PM
  5. Help identifying please?
    By logicprobe in forum Modern Pachinko
    Replies: 24
    Last Post: 12-17-2004, 10:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •