Volume controls on Yoshimnue

[new in town]

I know I will have to install separate volume controls in the machine but doe anyone know if there are factory controls? If there are I want to ensure that they are set to the lowest setting so the ones I install are not STRESSED out.

I do not see any on the top board in the door where the front speakers are installed. The side board left of the reels has a clear plastic covering on it and I see a rectangle box on it with a white tab but if that is not it I don't want to remove that cover.

It is a very LOUD machine. I can't believe the sound that comes out of those 1 1/2 X 4 inch speakers in the door.

[luckydog]

try following the speaker wires to the amp, it will be somewhere on the amp.

some are hidden on the bottom edge with an access hole in the plastic cover.

[new in town]

I did not see any on the board the door speakers are connected to. I will dig around that other board with the plastic cover again. Thanks Luckydog...

[new in town]

I found them tonight. They are on the board left of the left reel under the plastic cover. They are very small 3 position slide switches. Two of them.

Set to low the machine is playable, and for me (half deaf from 20 + years of jet engines) they work fine.