Results 1 to 6 of 6

Thread: Has anyone found a good store bought stand for their machines?

  1. #1
    Blind Shooter SixGunSamurai91's Avatar
    Join Date
    Sep 2018
    Location
    Alabama
    Posts
    61
    Thanks
    53
    Thanks Received
    32

    Default Has anyone found a good store bought stand for their machines?

    It's in the title, but has anyone found something store bought that works really well as a stand. Something readily available from Target, Walmart etc. Ideally, I need something to accommodate 2 machines side by side. So I guess it would need to be fairly sturdy.

  2. #2
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: Has anyone found a good store bought stand for their machines?

    Walmart has some 4 section cube storage I see used a lot. https://www.walmart.com/ip/Mainstays...olors/55811457
    Gotta catch 'em all Pa-chink-o

  3. The following 4 users say "Thanks" to Ikaria


  4. #3
    Blind Shooter SixGunSamurai91's Avatar
    Join Date
    Sep 2018
    Location
    Alabama
    Posts
    61
    Thanks
    53
    Thanks Received
    32

    Default Re: Has anyone found a good store bought stand for their machines?

    Well, I discovered an old thread on here about an Ikea unit being used as a stand, the product mentioned in the thread isn't available anymore. However, they offer this:
    https://www.ikea.com/us/en/catalog/p...814/#/60275812
    Which is very similar but you would need to purchase 2 to equate what was mentioned in that old thread. Although, it is still cheaper buying two of these than that old item was.

  5. #4
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,239
    Thanks
    67,837
    Thanks Received
    44,845

    Default Re: Has anyone found a good store bought stand for their machines?

    Quote Originally Posted by SixGunSamurai91 View Post
    Well, I discovered an old thread on here about an Ikea unit being used as a stand, the product mentioned in the thread isn't available anymore. However, they offer this:
    https://www.ikea.com/us/en/catalog/p...814/#/60275812
    Which is very similar but you would need to purchase 2 to equate what was mentioned in that old thread. Although, it is still cheaper buying two of these than that old item was.
    If you are talking about the Expedit series, Ikea replaced that series 4 years ago with the Kallax line..The inside cube dimensions are the same, but they made the outside walls of the shelves a tiny bit thinner to save an Insane amount of wood every year.. Anyway, they make the new ones in all the configurations as the old ones so you can get the 2x4 it will just be about 3/4" shorter when on its side!!

    https://www.ikea.com/us/en/catalog/p...887/#/80275887

    "Blowing smoke rings at the moon."

  6. The following 3 users say "Thanks" to MrGneiss


  7. #5
    Blind Shooter SixGunSamurai91's Avatar
    Join Date
    Sep 2018
    Location
    Alabama
    Posts
    61
    Thanks
    53
    Thanks Received
    32

    Default Re: Has anyone found a good store bought stand for their machines?

    Quote Originally Posted by MrGneiss View Post
    If you are talking about the Expedit series, Ikea replaced that series 4 years ago with the Kallax line..The inside cube dimensions are the same, but they made the outside walls of the shelves a tiny bit thinner to save an Insane amount of wood every year.. Anyway, they make the new ones in all the configurations as the old ones so you can get the 2x4 it will just be about 3/4" shorter when on its side!!

    https://www.ikea.com/us/en/catalog/p...887/#/80275887
    I saw that one too, the only problem for me was the shipping. It was $199. For some reason they consider that other model a small item, so it’s $9 for shipping even if you get more than one.

  8. The following user says "Thanks" to SixGunSamurai91


  9. #6
    Eye Shooter quester's Avatar
    Join Date
    Aug 2010
    Location
    Seattle WA
    Posts
    724
    Thanks
    425
    Thanks Received
    772

    Default Re: Has anyone found a good store bought stand for their machines?

    I use work benches, go to sears outlet stores, or harbor fright or similar, I like to stand sometimes and play, or I sit on bar stools
    2018 Jaws 2 Panic Again 2016 Superman Limit Break 2016 Majestic Prince 2015 MaCross Frontier 2 2015 Castlevania 2015 Persona 4 2014 Star Wars 3 2013 Biohazard 2011 Kung Fu Panda 2009 Star Wars 2 Light 2009 MaCross Robotech

  10. The following user says "Thanks" to quester


Similar Threads

  1. Replies: 5
    Last Post: 07-06-2017, 09:10 PM
  2. Replies: 0
    Last Post: 07-06-2017, 01:21 PM
  3. Bought one, found another. I need help identifying them.
    By Pachigraz in forum Vintage Pachinko
    Replies: 6
    Last Post: 04-01-2017, 07:30 PM
  4. We bought a house and we found this in our basement!
    By jodini in forum Vintage Pachinko
    Replies: 8
    Last Post: 03-04-2013, 07:18 PM
  5. A good stand
    By stss95 in forum Model Talk
    Replies: 38
    Last Post: 12-12-2006, 05:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •