Replacement 10v Bulbs

[joelparker]

I have a 1966 "A" model single-shot pachinko machine (10v) and I have restored it to the point where it works. The only issue is one of the bulbs is missing, the rest are working, any idea where I can find replacement bulbs for my machine ? They seem like they are an odd size.

[Tink]

Here is what I use:

Description: LAMP, INCANDESCENT, EDISON SCREW/E10, 12V, 3W; Lamp Base Edison Screw / E10; Bulb Size:T-3 1/4 (10mm); MSCP:1.19; Average Bulb Life:4000h; Supply Voltage:12V; Current Rating:250mA; Lead Style Edison Screw; Power Rating:3W

They are 12Volt so a bit dimmer.

[joelparker]

Where do you purchase them ?

[Tink]

Newark

[joelparker]

Do you have a part number or link ?

[Tink]

W577-5 is Newarks part #

[Moparformances]

well im happy to report these are perfect.

there the right size and the correct watt / volt /what ever for vintage Pachinko.. i went all in and bought a bunch cause i knew the shipping would piss me off no matter what quantity i bought.. so i bought a bunch and yes the shipping pissed me off, but the bulbs are exactly what i like and they work great..

a huge thanks to Tink for posting this... i have found a few local when needed but most of the time they are either to low watt or the huge balloon bulbs that dont fit allot of places..

[Tink]

For the tighter spots, try these, Newark Part #G987-5

Description: LAMP, MES, 12V, 2.2W; Lamp Base Type Edison Screw / E10; Bulb Size:G-3 1/2; MSCP:0.87; Average Bulb Life:4000h; Supply Voltage:12V; SVHC:No SVHC (15-Jun-2015); Current Rating:0.183A; External Length / Height:11mm; LED / Lamp Size:G3