Getter Mouse Help

[Scottf11961]

So, picked up machine #13 for me. Getter Mouse. Paid $35 at a yard sale. Figured if it didn't work, it will be good for at least parts. It was clean despite its age, so I rolled the dice, took it home, and plugged it in. Thankfully, it worked great. Plus it has the keys. However, I noticed some of the lights don't work. I tested all the bulbs, and they are all good. I googled Getter Mouse Slot Machine, hit the videos tab, and found a 51 second video of someone playing his Machine. His lights work. Here's a picture of mine. I circled all the lights that don't work. .and yes, I cleaned the connections on both ends. Any suggestions on where too look next? Screenshot_20230115-212201_Samsung capture.jpg

[rockston]

Sounds like you may have blown a fuse, or a transfomer. I would check both ends of the cords coming out of your power supply
and also any fuses on it. Should also be some small boards on the door and the connectors associated with them. Also the main connections going to the door from the case, both sides

[stampeed valkyrie]

these are all on smaller daughter boards that link via cabling back to the main board. Check ALL of your connections, unplug and replug could be bad connections. With the machine on get a meter on the sockets and see if they are getting power.

[Drunkenclam]

Could be a shared supply fault (like a common negative)