Page 1 of 2 1 2 LastLast
Results 1 to 20 of 30

Thread: Super stadium machine

  1. #1
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5

    Default Super stadium machine

    Hello, I do not know if my messages are getting sent. My Facebook account name is Mark Sam.
    My issues is with my Super stadium machine. I was able to get it to power partially up, but it seems power is only getting to the control board. I have the leds light up except for 2,6 and 9. Also there is no power to the rest of the unit. Even when I take the power board off the unit and power it directly with 24V AC, the same LEDs stay off. Any help would be appreciated.

    Thank you

    Mark

  2. #2
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    22,103
    Thanks
    27,543
    Thanks Received
    12,309

    Default Re: Terminator 2 pachinko machine won't power on please help

    Quote Originally Posted by mark505 View Post
    Hello, I do not know if my messages are getting sent. My Facebook account name is Mark Sam.
    My issues is with my Super stadium machine. I was able to get it to power partially up, but it seems power is only getting to the control board. I have the leds light up except for 2,6 and 9. Also there is no power to the rest of the unit. Even when I take the power board off the unit and power it directly with 24V AC, the same LEDs stay off. Any help would be appreciated.

    Thank you

    Mark
    and ginger snap cookies
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  3. #3
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    22,103
    Thanks
    27,543
    Thanks Received
    12,309

    Default Re: Terminator 2 pachinko machine won't power on please help

    Nice ,Clear Photos of the machine and the area's in question can really help us help you just post them on this thread the instructions for how to do that are on this forum.
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  4. #4
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    39,939
    Thanks
    69,344
    Thanks Received
    46,540

    Default Re: Super stadium machine

    WELCOME!!!

    "Blowing smoke rings at the moon."

  5. #5
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5
    Last edited by mark505; 10-27-2022 at 11:08 AM.

  6. The following 4 users say "Thanks" to mark505


  7. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Super stadium machine

    Have you checked the fuses inside the power supply? Oh i see thats written in the picture.

    did you check the voltage at each fuse?
    Ian #UKPachinko

  8. #7
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    22,103
    Thanks
    27,543
    Thanks Received
    12,309

    Default Re: Super stadium machine

    How does the Back of the power supply board look ? I.e. burnt circuit runs and such.
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  9. #8
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5

  10. #9
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5

    Default Re: Super stadium machine

    The back of the power board is clean. I do not see any damage. I measured the voltage from the bridge to the fuses. I am getting Fuse 10 - 32VDC, Fuse 9 - 0 VDC, Fuse 8 - 5VDC, Fuse 7 - 5 VDC, Fuse 6 - 0 VDC, Fuse 5 - 21 VDC, Fuse 4 - 32 VDC, Fuse 3 - 32 VDC, Fuse 2 - 0VDC, Fuse 1 - 5 VDC

    Any ideas?

  11. #10
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: Super stadium machine

    Im more of a vintage kinda guy

    but wanted to say

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  12. #11
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    22,103
    Thanks
    27,543
    Thanks Received
    12,309

    Default Re: Super stadium machine

    One of the power transistors on the heat sink burnt out ?


    If someone here could take measurements from their good operating Sankyo Lumina Frame Power supply then we could have a solid base to go from .
    Last edited by takethecastle57; 10-29-2022 at 05:07 AM.
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  13. #12
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Super stadium machine

    Is it in the manual?

    Do all the fuses without voltage come from the same feed?

    I have a desktop case. I’ll try to check later. As all lumina machines still packed away.
    Last edited by Drunkenclam; 10-29-2022 at 06:21 AM.
    Ian #UKPachinko

  14. The following 2 users say "Thanks" to Drunkenclam


  15. #13
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5

    Default Re: Super stadium machine

    I read in other posts about a Z1 diode.
    Does anyone know where I should look for this thing.
    I see a component marked Z2, but it looks fine.

  16. #14
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5

    Default Re: Super stadium machine


  17. The following user says "Thanks" to mark505


  18. #15
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Super stadium machine

    The Z1 normally blows if someone plugged the machine in without a step down transfomer.
    Blows, explodes. same thing.
    Ian #UKPachinko

  19. #16
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5

    Default Re: Super stadium machine

    I suspect this is what happened. But I can not find a component named Z1. I see this thing that is Z2, I also see 2 other components that might be also Z2 but I can not read the identification because of the orientation. Can anyone show me what a Z1 component looks like and where I should look for it on the board?

  20. #17
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Super stadium machine

    Its the VRD1 located above the capasitor next to the reset button.
    Ian #UKPachinko

  21. The following user says "Thanks" to Drunkenclam


  22. #18
    Tokie Owens mark505's Avatar
    Join Date
    Oct 2022
    Location
    toronto
    Posts
    11
    Thanks
    0
    Thanks Received
    5

    Default Re: Super stadium machine

    Thank you for the direction. I measured the component at VRD1 and got 2.256 VDC going both ways.... I switched the probe location and got the same measurement. From what I read I believe this means it got burnt in the open position. There is no marking on the component on VRD1 that I can read. Anyone know what I am supposed to replace this thing with?

  23. #19
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    22,103
    Thanks
    27,543
    Thanks Received
    12,309

    Default Re: Super stadium machine

    I know that Z on the component could mean a Zener Diode

    https://en.m.wikipedia.org/wiki/Zener_diode
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  24. #20
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Super stadium machine

    It can be removed altogether. But then you do loss any further protection. But should be ok for a quick test.

    although I always thought if it was faulty. The main input fuse would blow and the machine would be fully dead.
    Ian #UKPachinko

  25. The following user says "Thanks" to Drunkenclam


Page 1 of 2 1 2 LastLast

Similar Threads

  1. Just bought my first machine... Super Stadium
    By Adidas19766 in forum Modern Pachinko
    Replies: 28
    Last Post: 06-29-2010, 02:26 PM
  2. SUPER STADIUM PACHINKO PINBALL MACHINE *L@@k*
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 01-20-2009, 06:30 AM
  3. SUPER STADIUM PACHINKO PINBALL MACHINE *L@@k*
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 01-13-2009, 05:01 AM
  4. SUPER STADIUM PACHINKO PINBALL MACHINE *L@@k*
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 01-06-2009, 03:24 AM
  5. SUPER STADIUM PACHINKO PINBALL MACHINE *L@@k*
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 12-30-2008, 01:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •