Page 1 of 2 1 2 LastLast
Results 1 to 20 of 32

Thread: Ball lifter finally arrived

  1. #1
    Tokie Owens ernie99uk's Avatar
    Join Date
    Jan 2018
    Location
    yorkshire
    Posts
    10
    Thanks
    4
    Thanks Received
    12

    Talking Ball lifter finally arrived

    After only taking 2 days from Japan via EMS, and 8 days in our inefficient British customs the silver ball lifter machine has finally arrived!

    I had to pay an additional £34.76 in taxes and duties to collect it as well as a 50 mile round trip to the parcel depot.

    Total cost including shipping and duties was around £180, not too bad Even though the chrome's a little rusty!

    I'm pleased to say it's fully working and I've now ordered one of Dave's card reader emulators to make it all pretty authentic!

    I was going to add a photo of it, but for some reason it seems impossible to upload one on my android phone!

  2. The following 7 users say "Thanks" to ernie99uk


  3. #2
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,125
    Thanks
    8,770
    Thanks Received
    18,476

    Default Re: Ball lifter finally arrived

    A lifter and the emulator is the must have combo for pachinko!

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  4. The following 5 users say "Thanks" to compirate


  5. #3
    Tokie Owens ernie99uk's Avatar
    Join Date
    Jan 2018
    Location
    yorkshire
    Posts
    10
    Thanks
    4
    Thanks Received
    12

    Default Re: Ball lifter finally arrived

    Hopefully it should be a fully functional star wars or Spiderman installation by the end of the week! (I have both but only have space for one machine to be out of storage)

  6. #4
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by ernie99uk View Post
    (I have both but only have space for one machine to be out of storage)
    That sounds a familiar story.

    Now just need a data counter
    Ian #UKPachinko

  7. #5
    Sandwich Shooter browne92's Avatar
    Join Date
    Jan 2013
    Location
    Westlake, LA
    Posts
    476
    Thanks
    67
    Thanks Received
    703

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by Drunkenclam View Post
    Now just need a data counter
    Forgive my lack of knowledge, but what kind of data are we counting?
    pachinkoparts.com - Home Page
    Definition: Racecar-a device that turns money into noise.

  8. #6
    Tokie Owens ernie99uk's Avatar
    Join Date
    Jan 2018
    Location
    yorkshire
    Posts
    10
    Thanks
    4
    Thanks Received
    12

    Default Re: Ball lifter finally arrived

    Even with the lifter and emulator installed it's difficult to keep up with a fever on it.

    Is it more likely to have multiple fevers if you deliberately don't win anything when it goes into one?

    The videos and earsplitting noise are enough for me lol (it stopped me enjoying a nice album on vinyl whilst playing &#128514

  9. #7
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by ernie99uk View Post

    The videos and earsplitting noise are enough for me lol (it stopped me enjoying a nice album on vinyl whilst playing &#128514
    i love these little controls.. one per speaker.. must be soldered in place

    https://www.ebay.com/itm/6-Volume-Co...oAAMXQPd1RHZ3H

    others have used these (i have never tried them)

    https://www.ebay.com/itm/Volume-Cont...gAAOSwEW5ZejfO
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  10. The following 2 users say "Thanks" to Moparformances


  11. #8
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by browne92 View Post
    Forgive my lack of knowledge, but what kind of data are we counting?
    Sorry..must have missed this post
    The data counter stores information about the ratio of reel spins to fevers. Then displays it in various ways. But a bar graph is common.
    Can be interesting. But most of us have them for the additional flashy lights
    Ian #UKPachinko

  12. The following 4 users say "Thanks" to Drunkenclam


  13. #9
    Sandwich Shooter browne92's Avatar
    Join Date
    Jan 2013
    Location
    Westlake, LA
    Posts
    476
    Thanks
    67
    Thanks Received
    703

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by Drunkenclam View Post
    Sorry..must have missed this post
    The data counter stores information about the ratio of reel spins to fevers. Then displays it in various ways. But a bar graph is common.
    Can be interesting. But most of us have them for the additional flashy lights
    Are they readily available? Sounds like a good arduino project.
    pachinkoparts.com - Home Page
    Definition: Racecar-a device that turns money into noise.

  14. #10
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Ball lifter finally arrived

    Lots of different models available on Japanese websites. Some people by 5 at a time and ship them. Then sell one or two them in their own country to help reduce/recoupe the cost.

    It's possible to make one. If skilled. You just need to monitor the 3 main outputs from the machine. Although some machine now have more.
    Also available is USB adaptors to plug into a pc instead. But no fancy lights on that one.
    Ian #UKPachinko

  15. #11
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    6,057
    Thanks
    6,593
    Thanks Received
    3,745

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by Moparformances View Post
    i love these little controls.. one per speaker.. must be soldered in place

    https://www.ebay.com/itm/6-Volume-Co...oAAMXQPd1RHZ3H

    others have used these (i have never tried them)

    https://www.ebay.com/itm/Volume-Cont...gAAOSwEW5ZejfO
    I have used the ones in your second link when starting out with my first machine. They operate the same but are super easy to install. A bit costly sold as one each but a great option if you don't have soldering skills or tools.

  16. The following user says "Thanks" to Peteybob


  17. #12
    Blind Shooter billyp203's Avatar
    Join Date
    Jul 2007
    Location
    SouthWestern CT
    Posts
    76
    Thanks
    18
    Thanks Received
    60

    Default Re: Ball lifter finally arrived

    Just use these pots with the quick smoosh connectors, yes that's a technical term!
    https://www.ebay.com/itm/3-NEW-JAPANESE-PACHISLO-SLOT-MACHINE-DUAL-VOLUME-CONTROL-KITS-SKILL-STOP/271921494892?hash=item3f4fc8bb6c:g:WJ8AAOxy4eJTMyxF

    Find your speaker wire, clip it connect one side to each side of these and your ready to go, very simple.

    You can probably get them locally but ebay global shipping would make this a cheap ship cost. And no I'm not the seller.

  18. The following user says "Thanks" to billyp203


  19. #13
    Tokie Owens reach's Avatar
    Join Date
    Jan 2015
    Location
    missouri
    Posts
    14
    Thanks
    1
    Thanks Received
    8

    Default Re: Ball lifter finally arrived

    Do you have to modify anything on the pachinko machine when adding a ball lifter

  20. #14
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Ball lifter finally arrived

    it should just slide in the back.
    depending what model you have. I did have an issue with my Daita lifters that if you position them straight. they foul of the backs of modern machines due to the amount of circuit boards and animatronic, so you have to put them at a slight angle and extend the feed chute. As most lifters are the silver brand ones in the orange metal. they have a spring tube at the top, so this isn't a problem.
    Ian #UKPachinko

  21. #15
    Tokie Owens reach's Avatar
    Join Date
    Jan 2015
    Location
    missouri
    Posts
    14
    Thanks
    1
    Thanks Received
    8

    Default Re: Ball lifter finally arrived

    the orange machine works fine, but when playing, the lifter fills up with all the balls dropping into it, and the shooting tray above it goes empty---if I add bas to keep playing, it will continue to fill the lifter to overflow. How can you adjust the machine to send more balls into the shooting tray??

  22. #16
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Ball lifter finally arrived

    So you want the machine to payout more. To refill the front shooter tray. You either have to win more. Or if it's a CR machine. Get yourself a Daverob dongle.
    Ian #UKPachinko

  23. The following user says "Thanks" to Drunkenclam


  24. #17
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by Drunkenclam View Post
    So you want the machine to payout more. To refill the front shooter tray. You either have to win more. Or if it's a CR machine. Get yourself a Daverob dongle.
    agreed..

    you can adjust the nails..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  25. The following user says "Thanks" to Moparformances


  26. #18
    Tokie Owens reach's Avatar
    Join Date
    Jan 2015
    Location
    missouri
    Posts
    14
    Thanks
    1
    Thanks Received
    8

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by Drunkenclam View Post
    So you want the machine to payout more. To refill the front shooter tray. You either have to win more. Or if it's a CR machine. Get yourself a Daverob dongle.
    I just installed the orange lifter, and it works perfectly. When low in the top tray, balls are lifted up from the lifter, but as the balls are paid out, more balls go into the ball lift than the shooting(Middle)tray----This fills up the ball lifter tray and as you add balls to the center tray and continue play, the ball lifter flows over. The balls from the playfield can fill the lifter up quickly and empty the shooting tray. Is this he way the lifters should work.??? or am I missing something?? Before the lifter I had to fill the Top tray often. now with the lifter I have to empty the lifter often and put balls in the center tray. HELP

  27. #19
    Kungishi Spyder138's Avatar
    Join Date
    Sep 2014
    Location
    San Jose, CA
    Posts
    1,120
    Thanks
    3,399
    Thanks Received
    1,821

    Default Re: Ball lifter finally arrived

    Quote Originally Posted by reach View Post
    Before the lifter I had to fill the Top tray often. now with the lifter I have to empty the lifter often and put balls in the center tray. HELP
    My suggestion would be to buy a DaveRob dongle. This allows you to use the ball loan feature on the machine. You push the button and the machine sends balls from the top hopper to the shooter tray. As the top hopper level goes down the lifter sends balls up. With a little trial and error you'll find the right number of balls to recycle through top to middle to lifter and no longer have to manually shuffle balls.

  28. The following 5 users say "Thanks" to Spyder138


  29. #20
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Ball lifter finally arrived

    Hmmm. I've seen many lifters sold with different wiring and switches.
    How many external switches does yours have. Or is it just mains supply
    Ian #UKPachinko

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Replies: 4
    Last Post: 09-26-2013, 09:32 PM
  2. Ball lifter finally arrived!
    By pachiwall in forum Ball Lifters/Ball Management
    Replies: 2
    Last Post: 07-02-2011, 11:07 PM
  3. My New Black Spiderman Finally Arrived!
    By DugFreez in forum Pinball
    Replies: 9
    Last Post: 07-08-2009, 06:54 AM
  4. New Art Masterpiece has finally arrived!
    By Eddie in forum Modern Pachinko
    Replies: 13
    Last Post: 09-26-2006, 03:50 PM
  5. My first Pachislo......its finally arrived!!
    By DJMAT in forum Model Talk
    Replies: 12
    Last Post: 08-21-2006, 07:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •