First Machine - K1 Premium Dynamite - Rare Type

[oraysion]

I want to set the skill setting but all the machines seem different than mine. I have the K1 Premium Dynamite Pachislo w/Mike Tyson. Pics attached. Where would my button be?20170915_123427.jpg20170915_123444.jpg

[Moparformances]

Welcome to Pachitalk

can you post a picture of the inside of the door?? Im hoping somone can point out the odds change button..

[hanabi]

Waving hello and Welcome to PachiTalk!

If you check out our guide here : pachitalk/Manuals/Pachislots_Operation_Manual.pdf

which has lots of info including the location of the reset switches on various models, I believe yours is a 2007? Rodeo model and machine specific info is around page 11

[oraysion]

2006
.
.
20170916_090504.jpg 800×1423 .png

[Peteybob]

[Peteybob]

Hello oraysion and welcome to the group

That's the button! Did you get it figured out?

[oraysion]

Hello oraysion and welcome to the group

That's the button! Did you get it figured out?

I did get that figured out but I would like to get an auto stop for this machine. I am not sure what to get though. The info that I have is this:
K1 PREMIUM DYNAMITE PACHISLO JAPANESE SLOT MACHINE w/ MIKE TYSON AKEBONO & SAPP - 10/24/2006 - I think Daiso...
.
.
20170918_063751.jpg
.
.
which could I get to work?

[oraysion]

yes I did. Do you know what auto stop I could get for this?
.
.
.
20170918_063751.jpg

[Peteybob]

Sorry I'm not up to speed on the auto stops for the newer machines. You could try the following re-seller as he often has product coming and going. Send him a message on eBay with what you have and want.
http://www.ebay.com/usr/keep4safety?...p2047675.l2559

[Peteybob]

Hi oraysion, I was mistaken about what year my Sammy model is compared to your Rodeo K1 machine. Take a look at this eBay seller and ask them if their product would work in your machine if you are still looking for an auto stop board.
http://www.ebay.com/itm/192290931134?rmvSB=true

Although your stop board looks different they might have a unit that works for you.

[oraysion]

Hi oraysion, I was mistaken about what year my Sammy model is compared to your Rodeo K1 machine. Take a look at this eBay seller and ask them if their product would work in your machine if you are still looking for an auto stop board.
http://www.ebay.com/itm/192290931134?rmvSB=true

Although your stop board looks different they might have a unit that works for you.

No luck... Mine is just a bit different and I really do not know how to find it. I really want it. All the info I have is in the pic below

[oraysion]

No luck... Mine is just a bit different and I really do not know how to find it. I really want it. All the info I have is in the pic below

pachislo s-l1600.jpg

[Wayne-Ooo]

Oraysion, The picture you posted of what you are calling a Stop Board, isn't a Stop Board. It is a Parlor Interface board. It is where the parlor would connect the Battle Counter.

I believe, the Stop Board for that machine is integrated into the Motherboard. There is not a separate Stop Board, that you can connect a Auto-Stop to.

Personally, I would only use an Auto-Stop on a basic machine. There are a lot of machines that require you stop the reels in a certain order, (AT), with an Auto-Stop you always miss out on stopping the reels correctly on the first chance. The Auto-Stop will stop the reels left to right. You can turn the Auto-Stop OFF, after that first miss and play the machine as intended. Then turn it back ON, after the AT, (assist time).

IMO, a Auto-Stop just's works better on a machine without AT or Mini-Games.