Results 1 to 13 of 13

Thread: Tried everything to fix E1 error, still persists

  1. #1
    Tokie Owens c0dei's Avatar
    Join Date
    Aug 2016
    Location
    Utah
    Posts
    3
    Thanks
    0
    Thanks Received
    4

    Default Tried everything to fix E1 error, still persists

    Hello, I have a Jet set radio slot machine that has the E1 error code. I know that this is refering to a jam in the hopper, everything is cleared out and it's still giving me this error.

    Any ideas on how to fix this?

  2. #2
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Tried everything to fix E1 error, still persists

    Welcome Aboard



    Probably a faulty photo cell in the base of the hopper. the one that counts the tokens as they come out.

    Remove the hopper and make sure the arm isn't blocking it. then its down to clean, test with a meter, then replace.
    Ian #UKPachinko

  3. #3
    Tokie Owens c0dei's Avatar
    Join Date
    Aug 2016
    Location
    Utah
    Posts
    3
    Thanks
    0
    Thanks Received
    4

    Default Re: Tried everything to fix E1 error, still persists

    Thanks for the reply. I cleaned the cells, and it still gives an error. Any more ideas, or am I going to have to buy new photo cells?

  4. #4
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: Tried everything to fix E1 error, still persists

    does the wheel in the hopper turn freely? do tokens spit out when you turn it by hand?
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  5. #5
    Blind Shooter Buck's Avatar
    Join Date
    May 2016
    Location
    Halifax Nova Scotia
    Posts
    66
    Thanks
    100
    Thanks Received
    107

    Default Re: Tried everything to fix E1 error, still persists

    I wish you the best of luck solving this problem. I can't offer any advice on how to fix it.

    Jet Set Radio is one of my most FAVORITE video games of all time. I love it so very much. Would it trouble you too much to ask for a picture of your machine? It would make me very happy.

    Sorry to clutter your thread.
    Buck

  6. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Tried everything to fix E1 error, still persists

    If your good with a soldering iron. I would replace the photocell. They aren't expensive to buy. As to where to buy and what model. I have no idea
    Ian #UKPachinko

  7. #7
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,876
    Thanks
    2,416
    Thanks Received
    5,203

    Default Re: Tried everything to fix E1 error, still persists

    E-1 Error Code for a Sammy/Rodeo machine means RAM ERROR. Not a Hopper Error.

    I would try a "Hard Reset".

    Changing Odds & Full Reset.jpg
    Here's a list of ERROR CODES for SAMMY/RODEO MACHINES.

    Last edited by Wayne-Ooo; 08-11-2016 at 02:33 PM.
    What if...​the ​HOKEY POKEY, is what it's all about?

  8. The following 3 users say "Thanks" to Wayne-Ooo


  9. #8
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Tried everything to fix E1 error, still persists

    I was assuming that had already been done
    Ian #UKPachinko

  10. #9
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,876
    Thanks
    2,416
    Thanks Received
    5,203

    Default Re: Tried everything to fix E1 error, still persists

    Quote Originally Posted by Drunkenclam View Post
    I was assuming that had already been done
    Yep, I found out a long time ago you can't assume. Even if the post says "I've done a reset several times". I will still post the proper steps for a reset, so I know they are doing it correctly. Because there have been cases where they were not doing it correctly, they just thought they were, by pushing the reset button.

    An E1 error code is a hopper error for some machines/manufacturers, but not for Sammy/Rodeo/Aristocrat and some IGT machines. The post says "I have a Jet set radio slot machine that has the E1 error code. I know that this is referring to a jam in the hopper". Which, I believe is not true and has gotten misinformed somehow.

    Normally, the E1 error code on this machine is due to the machine being turned OFF for a long period of time.

    (I hope he hasn't tore into the hopper to much to hurt anything.)
    Last edited by Wayne-Ooo; 08-11-2016 at 06:53 PM.
    What if...​the ​HOKEY POKEY, is what it's all about?

  11. #10
    Tokie Owens c0dei's Avatar
    Join Date
    Aug 2016
    Location
    Utah
    Posts
    3
    Thanks
    0
    Thanks Received
    4

    Default Re: Tried everything to fix E1 error, still persists

    Hello everyone! Sorry about the short hiatus. Good news. I have managed to fix the unit and here is a video demonstration: http://youtu.be/2DVQq75iOjg

  12. The following 4 users say "Thanks" to c0dei


  13. #11
    Tokie Owens Coolatay's Avatar
    Join Date
    Jun 2018
    Location
    Illinois
    Posts
    2
    Thanks
    0
    Thanks Received
    0

    Default Re: Tried everything to fix E1 error, still persists

    Hey video is gone can u tell what u did

  14. #12
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,239
    Thanks
    4,682
    Thanks Received
    4,679

    Default Re: Tried everything to fix E1 error, still persists

    Quote Originally Posted by Coolatay View Post
    Hey video is gone can u tell what u did
    to Pachitalk Coolatay! Unfortunately c0dei has not been on Pachitalk since 8-12-2016. These old posts can be tricky, because we usually don't look at the date the thread was current. I've fallen for that a few times. I wanted to ask about the Bose upgrade...wether it was already in the programming and accessed thru the menu...or somehow added. As far as I know, nobody has cracked the programming code. As these are gambling machines...programming is a closely guarded secret!
    To see if I had any chance to get a response from c0dei...I clicked on his name in his avatar. c0dei
    Tokie Owens






    Join Date08-10-2016Last Activity08-12-2016 08:56 AM




    Recent Visitors

    The last 1 visitor(s) to this page were:


    This page has had 3 visits





    c0dei's ActivityVisitor MessagesAbout Me


    This screen pops up, and I can see when he last visited the site.





  15. The following 2 users say "Thanks" to pachiwall


  16. #13
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,239
    Thanks
    4,682
    Thanks Received
    4,679

    Default Re: Tried everything to fix E1 error, still persists

    OK...none of that looks right. Plus my last sentance was highlighted in red (like the "+Reply to Thread" below), so I just posted it early. If you click on your own avatar you can edit your profile, add photo albums, send private messages , etc.




  17. The following 2 users say "Thanks" to pachiwall


Similar Threads

  1. HE error
    By walzav31 in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 07-27-2015, 12:28 PM
  2. E3 error
    By kirkgleason in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 01-18-2011, 06:08 PM
  3. E4 error
    By lvandersloot in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 10-16-2010, 07:52 PM
  4. Error 1
    By zax15 in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 10-13-2010, 08:44 PM
  5. CE Error
    By DHCP1121 in forum Pachislo Technical Support Tickets
    Replies: 4
    Last Post: 02-13-2009, 09:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •