Pictures!!!

[tommy4132]

Well, I got my machine today and everything seems to work. It pays out on all combinations. The design on the cell really tells what combinations pay out. I have three lights out on the matrix and one screw in bulb for when you put a coin in. When I clean it up a little, I will make a video if you want.

[Card Shark]

That is one cool machine!!!

Looking forward to seeing more. A video would be great.

[SteveFury]

Wow nice!

[Lt Teddy]

A very nice and unusual machine. That is the first of that make that I have seen. If you drop a ball in all of the pockets what is the max payout?

The other thing I cannot tell is how do you replace the burnt out three lights? From the front or the back?

Congratulations on your purchase.

[emmadog]

Cool arrangeball and I've never heard of that brand at all on any pachinko machine. Great find.

[tommy4132]

I think the max payout is five. I did try that but I do not remember now. I will try again sometime. All the bulbs are attached to that really large circuit board. I also have a screw in bulb that is missing. I just have to figure out what voltage bulb to put in.

[tommy4132]

I have a token question. The machine came with 26mm tokens. I could get them but they are kind of pricey. I would like to use pachislo tokens. The problem is that they have not only a smaller diameter but they are also thinner. I can make it so the coin will pass but because they are thinner, the machine will shoot out two coins instead of one. Any suggestions?

[emmadog]

That sticker on the top front of the frame says what the max payout is/was at least at the time it was placed on there. Some machines are adjustable with a switch and some can be altered on the circuit board. I can't quite make it out but it looks like your sticker sez 5.

[Moparformances]

great machine..

a vid would be great

nice find

[emmadog]

I have a token question. The machine came with 26mm tokens. I could get them but they are kind of pricey. I would like to use pachislo tokens. The problem is that they have not only a smaller diameter but they are also thinner. I can make it so the coin will pass but because they are thinner, the machine will shoot out two coins instead of one. Any suggestions?

That's an interesting question. You'd probably have to modify the slide that moves underneath the coin tube and maybe the clearances I those associated parts. Sounds like it wouldnt be too hard but it may be difficult to get it to dispense reliably. If it were me, I'd keep it original and not take a chance with it. You really don't need many coins to play with. Particularly if you tweak the pins.

[Lt Teddy]

My answer was a little pricey too. If you use the new gold dollar they are just the right size. You have about seventy dollars to fill the machine and play with but at least you can always spend the dollars. If you buy the pricey coins you will never get your money back. I think most of us have a few of the right size that came with various machines but no one has enough to run a machine. I myself would not try and adjust the slide as it is all plastic and I know I would break something before I got it to work. Another thing I found is the gold dollar is alot heavier than a paschislo token and the machines that I have ran alot better on them. But with the amount of money it took in dollars I went back to tokens. You might check your token supply becasue I do know that some are thicker than others and you still might make them work.

[Lt Teddy]

That's an interesting question. You'd probably have to modify the slide that moves underneath the coin tube and maybe the clearances I those associated parts. Sounds like it wouldnt be too hard but it may be difficult to get it to dispense reliably. If it were me, I'd keep it original and not take a chance with it. You really don't need many coins to play with. Particularly if you tweak the pins.

I always try to make all of my arrangeballs pay close to one hundred percent that way they are both fun to play and you do not have to mess with the tokens too often. My silk road is hard to get it to play at about ninety percent but when you hit the jackpot it dispenses ten coins so it all works out.

[tommy4132]

Here is a video... Kyogoku Arrangeball - YouTube

[Moparformances]

Here is a video... Kyogoku Arrangeball - YouTube

nice machine congrats to ya

thanks for posting a Vid

[Card Shark]

Very cool video, thank you for sharing.

[emmadog]

Thanks for the vid. Beautiful machine and its in great shape.

[tommy4132]

I think the max payout is five. I did try that but I do not remember now. I will try again sometime. All the bulbs are attached to that really large circuit board. I also have a screw in bulb that is missing. I just have to figure out what voltage bulb to put in.

I have been working so much on cleaning the machine and building a place for it that I haven't really had a chance to see what it really pays out. It turns out what ever you win you get. I hit nearly every spot and won 12 and it paid out 12 tokens, so that is cool. I always thought with a five token max, there is not a lot of incentive to win big. So if you hit every pocket plus one in the 7 tulip, you can win 17 tokens in one game ( I only put 15 balls in the machine). The two lower left and right pockets are just replays which you can enter from the top or either side.

[Lt Teddy]

A very nice different and exceptionally good condition machine. I think I would put in the standard 16 balls if it were me because it has a 16 pay matrix across the top. Just my thoughts.

I have bought machines that had 22 balls in them. lol

[tommy4132]

The machine was paying out a little too easy so I bent some nails and that made it a little more difficult and then decided to use just 15 balls. With those two replay pockets you get a lot of extra shots which is fine. Now you go a few games with out winning anything and then go on these win streaks. Since I have no max payout, I can get some big wins. I love all my machines, but I have to say this one is a lot of fun and I see why you collect them. This will be my one and only, I am still a big fan of the mechanical vintages, there is just something about it them that I love. I do however also want a variety of machines and this one is a nice addition to the collection.

[Moparformances]

This will be my one and only,

nothing like living in denile..

ya right your one and only untill you find another one trust me