Looking for harness for pachislo machine

[jrobin9]

I was given a couple machines a month or so ago. Finally got around to trying them out. One 1998 electrocoin works fine except for connector cut for "max bet" button (I can fix that one). the other is a 1999 Aruze that had a family of rats in it. They chewed up many wires. I have repaired all the wiring in it except for the 96-pin din harness that comes out of the main motherboard. I tested it with the same connector out of the 1998 electrocoin and it appears to be working fine. Anyone have any idea where to get one of these 96-pin harnesses?

[SteveFury]

Welcome to PachiTalk!

I don't know if this is possible in your case but...
I've made some flat ribbon computer cables before by taking apart the DIN ends and putting them on another flat ribbon cable. Mainly to add a 2nd HDD on the line. I am not sure if that is possible with your Pachislo, but if it were mine and the ends could be removed, I'd get a hold of a number of ribbon cables and add them to the ends one next to another to make a complete 96 pin harness.

At least until I could get a genuine replacement.
It's just a thought.

[jrobin9]

Yep I considered that but just haven't tried it yet. I also found a 64 pin connector that will take flat ribbon cable (to take care of 2 rows). I am just trying to avoid having to build a 96-pin din by hand...