marusin-marushin???

[rattyneil]

OK got balls it fires them up and round but nothing happpens when they fall in the holes not sure if its all there . new 7.5 v bulbs and a 9 volt battery light up when i pull a lever in the back but the balls dont do anything??? there are levers inside that can divert the balls i dont know how they should be set up . anyone got a diagramme on how this should look in the back and what path the balls should take??

[mxfaiman]

post some pictures of the problem areas and a brief situation, this is the best way we can help ya out.

[rattyneil]

Got it working just jammed up inside now pays out and lights up just gonna have to clean it a bit and oil some problem areas. but it is working and pretty awesome for a 1965 single shot machine . the 7.5 volt light s are nice and bright too. thanks guys ill post some pics one i clean it a bit.

[Moparformances]

congrats

[mxfaiman]

Got it working just jammed up inside now pays out and lights up just gonna have to clean it a bit and oil some problem areas.

DON'T OIL!! Some simple cleaning of the areas will more than likely fix the problem.

Oh yeah congrats on getting it to work. I can't wait to see some more pictures.

[rattyneil]

Dont worry i didnt use oil . i cleaned the sticky parts and used graphite powder . it pays out all the time now . very happy with it. funny to think its 6 years older than me . and in better shape.lol.

[rattyneil]

ok all working lubed with graphite cleaned it all etc got the machine fully working i posted this elsewhere but had to put it here as this is where i started talking about it i do have other posts but still kinda new to this layout so forgive me. anyway it works i put a 9 volt in two 7.5 voly bulbs cleaned the contact switch added balls and the thing works briliantly .pays out rings bells ect.very happy changing the way i had it on the wall though... i am mounting it with hinges so i can swing it open to get to the inside. and adding a box below to catch all the spent balls. no case no fancy stuff just mounting it straight on the wall. ill post pics when done.
#

[rattyneil]

S8000051.jpgS8000050.jpgS8000052.jpgS8000053.jpgS8000054.jpgS8000055.jpgS8000056.jpgS8000057.jpgS8000058.jpgWell took some messing around but changed out the light duty brackets(bending) and now its good to go . i hinged it to the wall so i can swing it open to get access. also put a wee bracket under the right side to help support .here are some pics.