Page 1 of 8 1 2 3 4 5 6 7 8 LastLast
Results 1 to 20 of 142

Thread: New Guy here with Model A single shot

  1. #1
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default New Guy here with Model A single shot

    New guy here with a pic of my Pachinko machine. My brother in law brought this back from either Japan or Taiwan back in the early 70s.

    Trying to find any info on it, I know it says Sophia on it and it's made by Nashijin, a model A single shot. And saw the video on youtube where they refer to it as a "recycler".

    I have had contact with Billy at VintagePachinko.com about dvd's and a light kit for it, as the wiring is all butched on it.

    One question in particular is on the red jackpot "see saw" on the back, it seems like there is a Pachinko ball inside of it. Is it supposed to be there (counterweight?) or should it be removed?

    Also it's really hard to get the ball to even go to the top of the field, very "dead" feeling. On the tip that hits the Pachinko ball, there is a really cheap-looking spring, sort of like would be inside a retractable pen. Pics I have seen so far the spring looks really substantial, so might need a new spring. Am hoping that's all that's wrong with that.

    Ok here I will try a pic, can anyone tell me if there is a specific name for this style, other than what I have said so far? Also is there a date of production on this somewhere?
    Attached Images Attached Images

  2. The following 11 users say "Thanks" to Gilly


  3. #2
    Waste not, Want not mudfud's Avatar
    Join Date
    Nov 2008
    Location
    berkeley and salinas, CA
    Posts
    2,301
    Thanks
    1,954
    Thanks Received
    6,538

    Default Re: New Guy here with Model A single shot

    WELCOME to pachitalk.

    you have found the world's largest collection of pachi, um, experts? addicts? know it alls?

    any way, this is a very common machine.

    post pix of specific parts or questions, and you will have your answer within the day (or sooner, usually)

    this is what we call a Nishijin A. yes, there is a ball in the seesaw as a sliding weight and yes, the spring that hits the ball should be a short, stout one, not a ballpoint pen spring.

    perhaps you can find a picture of what it should look like. i'll check my files.

    usually with pachi, you can't just have one, so welcome to the hobby that keeps growing and the place where you'll find lots of encouragement.
    ______________________________________________________
    found a picture of a B hammer.

    also, age wise it's probably late 50's, early 60's. they say that tulips were invented around 1960, then became quite popular.

    this nishijin A of yours is called a single shot, which is how the original pachi's worked.

    here's my refurb of a seashell one with the same wiring as yours, for reference. I had to add a couple wires to get the spare ball light working, as those had been chopped off of mine, too.

    YouTube - pachinko - nishijin A single shot seashells
    Last edited by mudfud; 10-20-2010 at 07:53 AM. Reason: Automerged Doublepost
    PachiTalk

    chewy's motto: life is plumbing

  4. The following 5 users say "Thanks" to mudfud


  5. #3
    Waste not, Want not mudfud's Avatar
    Join Date
    Nov 2008
    Location
    berkeley and salinas, CA
    Posts
    2,301
    Thanks
    1,954
    Thanks Received
    6,538

    Default Re: New Guy here with Model A single shot

    forgot the pix
    Attached Images Attached Images
    PachiTalk

    chewy's motto: life is plumbing

  6. The following 5 users say "Thanks" to mudfud


  7. #4
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: New Guy here with Model A single shot

    Welcome to Pachitalk

    Looks like ya got your first post past the Mod's

    and your questions answered...

    if you can take a close up pic of your shooter springs I have a parts machine at home that has a spring on it... (at work right now) and ill post a pic of it for ya.. if it looks like it will work... its yours
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. #5
    Waste not, Want not mudfud's Avatar
    Join Date
    Nov 2008
    Location
    berkeley and salinas, CA
    Posts
    2,301
    Thanks
    1,954
    Thanks Received
    6,538

    Default Re: New Guy here with Model A single shot

    wow! you work early, mopar.
    PachiTalk

    chewy's motto: life is plumbing

  9. The following user says "Thanks" to mudfud


  10. #6
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: New Guy here with Model A single shot

    yeppers
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  11. #7
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,504

    Default Re: New Guy here with Model A single shot

    Welcome to PachiTalk Gilly!

    While your taking pics... perhaps a close up of the center of your cell... not that it will help with your questions, I'd just like a better look.
    Dawn

  12. The following 3 users say "Thanks" to dattia


  13. #8
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    I'll put up seperate posts for the different questions and requests and so forth.

    First, the picture of the spring on my "shooter". Mopar, if you have one to spare, that would be great. Billy wants pics of this too, so he might have one as well.
    Attached Images Attached Images

  14. The following 4 users say "Thanks" to Gilly


  15. #9
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    Pic of the center of the cell, which I assume means the playing field.
    I haven't found out yet what happens if you get it in the green cup. The red one I know goes in the tulip. I forget if you get any extra balls for the tulip or not.
    Also is it normal for some of the pins to be removed at a few of those strategic spots above the chrome cups?
    Attached Images Attached Images

  16. The following 6 users say "Thanks" to Gilly


  17. #10
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    General question, the next pic is of a rod, I think it has to do with the balls dropping from the top bin into the jackpot bin. The rod doesn't stay on because whatever holds it on is gone..I was thinking finding a small circlip at the hardware store?
    Attached Images Attached Images

  18. The following 3 users say "Thanks" to Gilly


  19. #11
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    Melty
    Anyone got a part like this that isn't melted?
    Attached Images Attached Images

  20. The following 3 users say "Thanks" to Gilly


  21. #12
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    Final one, why do ya think this hole was cut in the back?

  22. The following 2 users say "Thanks" to Gilly


  23. #13
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    Oops, here is the picture
    Attached Images Attached Images

  24. The following 3 users say "Thanks" to Gilly


  25. #14
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: New Guy here with Model A single shot



    For your dead shooter, put a couple drops of a light weight oil on the bearings, and work the launch lever up and down, that should free it up. I used 3-in- one oil on mine and it works very well. Vegetable oil should do nicely too. Mine shoots balls off the bumper and almost back to the launch lane.

    On the hole in the back plastic. I would say it's to put balls through to check the payouts without having to open the front.
    Gotta catch 'em all Pa-chink-o

  26. The following 2 users say "Thanks" to Ikaria


  27. #15
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    I think it's "operating" OK (not sticky or slow), just not a lot of ball action, pretty convinced it's due to the ball point pen spring.
    Gilly

  28. #16
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: New Guy here with Model A single shot

    Quote Originally Posted by Gilly View Post
    I'll put up seperate posts for the different questions and requests and so forth.

    First, the picture of the spring on my "shooter". Mopar, if you have one to spare, that would be great. Billy wants pics of this too, so he might have one as well.
    first one

    spring looks like it should be good... but hear is a pic..

    Parts (2).jpg
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  29. The following 2 users say "Thanks" to Moparformances


  30. #17
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: New Guy here with Model A single shot

    Quote Originally Posted by Gilly View Post
    Pic of the center of the cell, which I assume means the playing field.
    I haven't found out yet what happens if you get it in the green cup. The red one I know goes in the tulip. I forget if you get any extra balls for the tulip or not.
    Also is it normal for some of the pins to be removed at a few of those strategic spots above the chrome cups?
    nice cell

    nearly all 99.9% of all vintage pachinko only have one payout.. same payout no matter what pocket the ball lands in
    ______________________________________________________
    and no pics would have been removed by the parlor... i have nails as well
    ______________________________________________________
    Quote Originally Posted by Moparformances View Post
    nice cell

    nearly all 99.9% of all vintage pachinko only have one payout.. same payout no matter what pocket the ball lands in
    ______________________________________________________
    and no pics would have been removed by the parlor... i have nails as well
    and no pins would have been removed by the parlor... i have nails as well
    ______________________________________________________
    Quote Originally Posted by Gilly View Post
    General question, the next pic is of a rod, I think it has to do with the balls dropping from the top bin into the jackpot bin. The rod doesn't stay on because whatever holds it on is gone..I was thinking finding a small circlip at the hardware store?
    yes a circlip... i call them "E" clips but either way thats what your missing
    Last edited by Moparformances; 10-20-2010 at 09:22 PM. Reason: Automerged Doublepost
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  31. The following user says "Thanks" to Moparformances


  32. #18
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: New Guy here with Model A single shot

    Quote Originally Posted by Gilly View Post
    Melty
    Anyone got a part like this that isn't melted?
    yes ya can take your pick...

    none are exactly right but no one will ever know

    Parts (4).jpg
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  33. #19
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: New Guy here with Model A single shot

    Quote Originally Posted by Gilly View Post
    Final one, why do ya think this hole was cut in the back?

    when a machine gets jamed up people can't figure how to unjam it

    so why not cut a hole in it

    not the first time i have seen that Trick
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  34. The following user says "Thanks" to Moparformances


  35. #20
    Fever Hunter Gilly's Avatar
    Join Date
    Oct 2010
    Posts
    104
    Thanks
    25
    Thanks Received
    231

    Default Re: New Guy here with Model A single shot

    Assuming Billy doesn't want some crazy price on the spring, I'll probably just order it from him, I'll be buying a light kit and dvds anyways. I think the one I have on there is too "giving" which is taking the energy out of the shot.

    Gilly

Page 1 of 8 1 2 3 4 5 6 7 8 LastLast

Similar Threads

  1. New Single Shot Project
    By Bat in forum Vintage Pachinko
    Replies: 9
    Last Post: 11-24-2010, 11:44 AM
  2. Early Model A Single Shot Machine - $100 Indianapolis
    By JACKSJE4 in forum FB Marketplace, Craig's List and Other Listings
    Replies: 0
    Last Post: 07-08-2010, 10:18 AM
  3. Single Shot?
    By hanabi in forum eBay - General Auction listings
    Replies: 5
    Last Post: 03-08-2010, 11:11 AM
  4. Single Shot Conversion
    By johnnynormal510 in forum Vintage Pachinko
    Replies: 2
    Last Post: 10-10-2009, 01:17 PM
  5. vintage single shot for over $5K?
    By mudfud in forum Yahoo Japan - Auction Area
    Replies: 4
    Last Post: 07-31-2009, 07:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •