E006 error

[Madmaniac67]

This machine has been showing the E6 error ever since i got it, i have tried master resets and everything, i have tried to take good pictures in order to get help, please tell me if i need more, this is my first machine and i have no idea what any of the buttons on the inside do, it seems that on the inside the overflow tray is missing, could that be a problem? i have about 500 tokens in the hopper, any info on how i could get this thing working would be great, i have an manual but it doesn't explain much at all, it told me to do a master reset so i did, that didn't work, it also said put it into idle mode first but doesn't explain how to get it into idle mode. Thanks.

[luckydog]

the first thing i would do is remove tokens from hopper and wipe it clean, the put a few tokens in the hopper and manually spin the wheel at the bottom to see if it spits out tokens ok.

cleaning the tokens in a little CLR or soapy water and rinse, snd dry good wouldn't hurt.

you do have a reset key, don't you??

[Madmaniac67]

Thank you for the reply! i have a reset key, i will try cleaning it out now

[Madmaniac67]

The hopper spits out tokens great, i wiped it clean and cleaned all of the tokens, i tried a reset and still stuck on E006 error

[Chrisdice]

the missing over flow tray is ok as long as the metal probes are not touching any metal. Btw your machine is called Yosimune (2003) not Monte Carlo. Your belly glass has been altered.

[Madmaniac67]

oh, ok, thanks for the info, are there any other steps on fixing the E6 error?

[Madmaniac67]

BTW,When i turn the reset key to on nothing seems to happen at all, when i turn it off same thing, nothing at all, is it supposed to do something when i turn the reset key?

[luckydog]

PachiTalk Research Center - FAQ - Pachislo - How To Set the Skill Levels of Your Pachislo - PachiTalk

this above will clear most errors,

have you tried turning the door key to the left for soft rest???

[Madmaniac67]

I tried the steps in the link that you gave me, it didnt work, the machine just keeps showing the E006, i also tried a soft reset, nothing seems to be working, while the machine is on all it does is repeat a certain chime really loudly.

[SlotsRfun]

Hi
In your picture: PachiTalk
change the position of the switch on the left to OFF ( up/down) and throw the switch on the right to ON (up). See if that helps! That is the usual position when operating properly on my machines