Help with machine II

[cwadeclausen]

Hi, new here... I'm having alot of trouble with a recently purchased machine. I have attempted the basic reset procedure, but am told that the coin hopper may be sticky from storage. As I don't read Japanese, is there any one out there who could help guide me through a successful start up on one of these machines?

[Chrisdice]

Hi, new here... I'm having alot of trouble with a recently purchased machine. I have attempted the basic reset procedure, but am told that the coin hopper may be sticky from storage. As I don't read Japanese, is there any one out there who could help guide me through a successful start up on one of these machines?

Hi cwadeclausen and welcome to pachitalk. I would recomend that you start your own help thread as MissingToof's problem has not yet been resolved and its not fair to him to start another topic in his thread.
But real quick disconect hopper, clean optics as best as you can (no windex). reseat all harnesses. do a full reset. follow these steps.
"TURN YOUR MACHINE OFF FIRST"

1. Locate internal key switch, and insert key.
Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

2. Turn "reset" key switch to on, to access programming mode.

3. Turn on machine now.

4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door.

5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, to lock odds level into machine memory.

7. Turn "reset" key back to off.

8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.


If this doesn't work start a new thread and we'll get you fixed up.