Cheap pachislo stand
I needed something to put my pachislos on so I made these out of 2x3's and plywood. The legs are angled at 5 degrees for stability. I've attached an adjustment pad to each leg. There's a lighted switch on an aluminum plate at the front. The finish was quick and dirty; bondo as filler, oil based primer, and latex white semigloss final coat. If I make more I'll try for a 'stain and polyurethane' finish and see how that works. The stands work great and keep the pachislos at just the right height for a common chair. The cost for materials for each was less than $20 (2, 2x3's, leveling pads, 2'x4'x.5" plywood, lighted switch, outlet strip).
Luke
Reply With Quote
