Results 1 to 6 of 6

Thread: Thanks to everyone for your help - here's what you made

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Blind Shooter Solidstate's Avatar
    Join Date
    Jul 2005
    Location
    UK
    Posts
    49
    Thanks
    13
    Thanks Received
    29

    Thumbs up Thanks to everyone for your help - here's what you made

    You may have seen me around asking about ball lifters and hoppers etc. You may have even posted a response to one of my newbie questions.

    Well I thought everyone who helped me by giving me their advice and spending a few minutes of their time should know what they have been working on.

    I started with a Pachislo - that lead me to these boards. Everyone seemed to be saying that Pachinko not Pachislo was where it was at. People were also saying that Star Wars was the best new Pachinko. So following advice I bought a Star Wars. I then read up on the whole Cyclic/Lifters debate and yadda yadda yadda ........ here I am.

    My Star Wars now has a sturdy home-made case, including ball lifter, an extra hopper that holds about 1000 balls, integral transformer and a mains lead strip so that it runs off one plug. My key is on the way (it refills by opening the door and loading the new hopper). All I need to figure out is how to fool the payout sensor and it will be complete.







    Its even the perfect height to fit a cornflake holder as a payout catcher -the hole on it matches up identically with the hole on the machine (this was luck rather than planning)



    So I'd just like to say a big thank you to everyone on the forums - cheers
    Unfortunately this is the end of this odyssey for me. I've run out of space and the missus wouldn't let me spend any more money on these things even if I had somewhere to put them. So I'll enjoy the ones I have - maybe I'll pop back in a few years and see them in the vintage section.

  2. The following 12 users say "Thanks" to Solidstate


Similar Threads

  1. How its made Pachinko!!!
    By Eddie in forum These are the days of our lives...
    Replies: 4
    Last Post: 05-12-2008, 08:55 PM
  2. Pachinkos that should be made...
    By JSpirtos in forum Modern Pachinko
    Replies: 14
    Last Post: 02-24-2008, 06:43 PM
  3. The decision is made
    By Tony Junior in forum These are the days of our lives...
    Replies: 34
    Last Post: 01-22-2007, 12:43 PM
  4. is there money to be made
    By marniebattle in forum Vendors & Manufacturers Pachislo
    Replies: 59
    Last Post: 09-22-2006, 07:26 AM
  5. what are thay made out of ???
    By misscrazylady in forum Dear Arby
    Replies: 20
    Last Post: 05-18-2005, 08:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •