pachinko steering wheel stopper

[RKnarr01]

Arby you'll like this

http://216.239.39.104/translate_c?hl...language_tools

[rupan777]

I've seen plenty of items like that before but that one is a little fancy. I remember I saw a website a long time ago that showed you how to make your own (as if it's not too difficult to figure out)...I'll look it up if it's still available.

[arbycoffee]

Ok, lesson time my friends.
On Sankyo cases (at least the newer ones) the steering wheel has three wires coming out and connects in the side of a clear boxed board on the end of the steering wheel. one wire in this group is gray, poke a pin in it and touch the metal frame. Now turn the steering wheel and the bals shoot without grounding.
I just use a little painters trim tape (masking tape) and adjust it to where I like it, no scratching or tape resadu. Cost 5¢

But it is a pretty Rich.

For you others machines unplug the connector and use your multi-meter to find which is your ground.

[RKnarr01]

5cents is much better than 25dollars after shipping and such

[arbycoffee]

I just a littl cheap at times