Credit-Add Only

[cmk8895]

As I was going through all of my machines looking for the coin sensor wires I found a possible error on your list as well. On my Sammy model (King Camel), the white and yellow wires are reversed from what your table says. The are in the same positions (2 & 5), but the yellow on 2 is CS1 and the white on 5 is CS2.

Just wanted to point that out as possibly meriting further investigation of other Sammy models.

BTW, I also have pulse widths and time lags from CS2 to CS1 if they would be helpful. I have this info for all of the machines I own (see list in signature).

cmk

[autoslot]

CMK, great information and pictures, just what I was looking for! I've updated my web site with the new info.

Zeron, Thanks for the info, but Babel is made by Aruze, and I already had that information on the table.

Vince

[Lazarus]

Good luck with the Kiwame. I have not been able to get a credit mod to work yet. I think it is something to do with the ground. If you get something to work with the Kiwame Auto Slots Let me know.

[autoslot]

I've added a couple of credit-add only kits to my website. These are for machines with over 5 volts on the coin sensors and or negative coin logic.

Laz, I've shipped one of the CA-03-NCs to CMK to try on the the Luster Kiwame. He will update once he gets it hooked up.

Vince

[cmk8895]

And believe me, I am waiting in breathless anticipation so the second I get my fingers on it it's going in. Look here for updates once it arrives.

cmk