This will void your warranty reset switch replacement

[musky]

Crap, I broke the key off in my reset switch on my JSRhttp://www.pachitalk.com/forums/atta...ntid=472&stc=1
Remove the hopper so you can remove the power supplyhttp://www.pachitalk.com/forums/atta...ntid=473&stc=1
Carefully unplug the wiring and remove the power supplyhttp://www.pachitalk.com/forums/atta...ntid=474&stc=1
With the power supply out and on the kitchen table, unplug the wiring to the switches on the front panel. Makes it easier to get to the reset switch. Oh, try not to spill wine on your wifes table cloth.http://www.pachitalk.com/forums/atta...ntid=476&stc=1
Remove the old switch and.....http://www.pachitalk.com/forums/atta...ntid=477&stc=1
Check with an ohm meter to see if it is normally open or closed in the normal operating position
http://www.pachitalk.com/forums/atta...ntid=478&stc=1
Mine was normally closed so I installed the new switch wired normally closed
http://www.pachitalk.com/forums/atta...ntid=480&stc=1
Reassemble the power supply and plug everything back
http://www.pachitalk.com/forums/atta...ntid=482&stc=1
Before putting JSR back together, lets take care of another important item. Installing a restraint clamp on the power cord.....shame on you TDC GAMES, this should be standard practice.
http://www.pachitalk.com/forums/atta...ntid=483&stc=1
Reassemble and plug the wiring back in place. Then it's time for the smoke test
http://www.pachitalk.com/forums/atta...ntid=484&stc=1
TADA......success.
http://www.pachitalk.com/forums/atta...ntid=485&stc=1
Have FUN and Learn some, now to just make this puppy a little quieter.