how to do Cyclic Usage to a newSankyo frame

[arbycoffee]

How to change a Parlor Ready to a American Pinball Action™ (Cyclic Usage) for the latest Sankyo frame.






Back side of the cell with the cover on











Back side of the cell with the cover removed and a plastic angle hot glued in even with the opening in front.





Front side of cell showing the white insert even with the opening.





Shows the back cover open and how it looks before any changes.





Shows parts are cut away to hold a hot glued in insert white plastic angle the full length with a foot angled toward the front.





A close up of the foot, that angles the balls back to the front shooters tray thru "X".
That piece is hot glued to the longer angle.





Shows the long white angle from the full back of the machine.






This show the back of the front where the balls go back out to the shooting tray.

[Tulsa]

This doesn't appear to be true cyclic usage but what I would label as semi-cyclic. All the payout pockets will still function as normal but the spent balls will travel into the bottom front tray so you don't have to reach around behind the machine to get them. They come to the front for you. Is this right Arby?

[arbycoffee]

this one is true cyclic it is the other posting that is the semi-bypass.
this is from Japan complete, all balls go back out into the shooters tray