volume controle

[djaypee]

Hi guys,

Happy to be with you.

I am looking for the complete references of the potentiometers to put in my pachislo machines. Since I am absolutely not an electronician, can anyone give me the full reference of these so i can just hand them out in a store and buy them ?

Also I need the complete specifications of the machines to be able to adapt them to 220v. Volts ? Herz ? Anyone knows that ?

Many many thanks,

Jay

[arbycoffee]

These are for your speakers, the voltage to run your machine is not important
Here a good place to start there are some nice small ones, that hook next to thr speaker.
http://www.pachitalk.com/forums/forumdisplay.php?f=58

[pachitom]

If you are going to run them off of a 220V supply you will need to step the voltage down to 110 volts and they run at the USA standard 60 hertz.
I am not sure of the primary current of the machines off hand, maybe someone knows. He will need to know the primary current and NOT the secondary current of the transformers people usually talk about.

[arbycoffee]

If the machine is 24Volt or 100volt, than a transformer to reduce to it. But that would not be any different on the speakers.

Once you have the machine running the speakers are going to use the same pot as if it was here or in Japan or UK.
That is if I fully understand everything. If I got it all packed around, just hand me a warm pint please and I will go back to my corner.