Pachislo with no keys.

[Pinballrocks]

Hi all,
Ive been away for a while and im glad to be back.
I have recently bought 2 Pachislo's.
1 is a SANKYO Spiderman and the other is a TAIYO ELEC Avenger Heroes. I "have" opened the Spiderman but i don't have a reset key to clear the E1 error.
I cant open the AVENGER HEROES by TAIYO ELEC and I dont have a reset key to clear the error.
Does anyone know how i can get the keys and where from?

Any help will be much appreciated.

Thanks Paul

[rockston]

Just replace the keyed switches with single pole single throw toggle switches, 2 wires is all you are dealing with.

[Pinballrocks]

Thanks for your advice.
That sounds like the best option for me.

Cheers
Paul

[rockston]

Thanks for your advice.
That sounds like the best option for me.

Cheer
Paul

BTW On the one without a door key, lay the machine on its side and see if there is a hole in the bottom. If so reach in there and trip the lock bar. Look at your other machine
to get an idea of what you are reaching for and how to move it.
Zip tie the spring loaded mechanism in the open position until you come up with a solution for the front door.

[Pinballrocks]

BTW On the one without a door key, lay the machine on its side and see if there is a hole in the bottom. If so reach in there and trip the lock bar. Look at your other machine
to get an idea of what you are reaching for and how to move it.
Zip tie the spring loaded mechanism in the open position until you come up with a solution for the front door.

Thanks again mate! I will check that out!

[Gameking6]

Thanks again mate! I will check that out!

Did you get into the machine? If so could you share what and where to look to open it? I'm hoping it has access on the bottom like Rockston had mentioned.
The reason I ask is; I'm going to go look at a Taiyo (locked no key) and I can't really check it out if I can't get into it😀.
Thanks

[Pinballrocks]

Yes mate I got in from under the machine through the opening.