Daiichi New Vanguard NV100

[sparky kilowatt]

I like the box. Is that from Amazon?

Your center feature has been reconstructed using the pieces you sent me.

Sparkyscenter.jpg

The template for reconstructing the mounting ears arrived yesterday and I have started on that process.

Wow! Thank you! What type of glue are you using for all these fixes you do?

Yes, the 9v battery box is from Amazon, the wires are kind of small, but I've powered 4 LED's and not any issues at all, they didn't even get warm.

https://www.amazon.com/dp/B07T83B4SW...roduct_details

[SibSr]

Gap filling / thick superglue that I get at the hobby shop. Superglue is the only thing that will adhere all these different materials and dry fast, and dry strong.

I also added extra plastic pieces, and a metal wire at the points where there had been breakage for extra reinforcement.

Sparkyscenterfix.jpg

The white rectangle of plastic is glued to the back of the 2 broken pieces in this location, and spans the repaired crack to provide more strength. And the wire does the same thing for the little square platform to attach to since the original connection was wimpy.

Sparkyscenterfixwire.jpg

The box itself got a little extra rigidity by adding an extra wire to the back

Sparkyscenterboxsupport.jpg

And then the wire went into one of the bottom grooves

Sparkyscenterboxsupportfix.jpg

Sparkyscenterboxsupportinplace.jpg

and is now held in the groove with a good dousing of superglue

Then a little putty in the remaining gaps

Sparkyscenterputtied.jpg


The mounting ears are tricky in that I'm replacing missing material, which means color matching of the repair with the original plastic is a challenge.
Probably going to have to paint it which I had avoided so far.