Make Machine Lend Balls That Doesn't Have the Button Not a CR Model

[meek424424]

I have an early 2000's Sankyko Pachinko Machine (Fever Seven Flash) that does not have the CR Functionality and does not have the ball lend button. Is there a way to rig this machine with a controller and/or button that will make the machine pay out? My plan is to build a cabinet with a ball lifter on it, but realized if the machine can't lend you balls you don't get a lot out of the ball lifter. Any help would be greatly appreciated. I am sure there is a post in the forum somewhere, but couldn't find anything, despite my best searching efforts. Thanks all!

[NicoleExpress]

Not familiar with that particular machine, does it have any pockets that pay out without giving you a spin on the reels? You could attach a button to the ball sensor for those pockets and that would trigger it to output balls.

[lotsoballs]

The most simple workaround would be to just widen the nails gap around the pockets to just make the machine payout super loose in regular play. 100% or 110% payout rate, so that you’ll rarely run out of balls unless really terrible player.

Make the machine a “ringer”, parlors have some machines set really loose; (to entice other players to think they can win big too!) and others super tight and stingy with payouts. No need for tight machines at home anyway…

[meek424424]

Yes there are a few pockets that pay out and don't give you a spin. I might give that a shot. Do you have a good way of figuring out where to tap into that circuit? There isn't a ton of info out there that I have found. Thanks!

[rockston]

I have an early 2000's Sankyko Pachinko Machine (Fever Seven Flash) that does not have the CR Functionality and does not have the ball lend button. Is there a way to rig this machine with a controller and/or button that will make the machine pay out? My plan is to build a cabinet with a ball lifter on it, but realized if the machine can't lend you balls you don't get a lot out of the ball lifter. Any help would be greatly appreciated. I am sure there is a post in the forum somewhere, but couldn't find anything, despite my best searching efforts. Thanks all!

I have 2 videos about this on my channel https://youtu.be/JKnfGYgCwL8

[meek424424]

I have 2 videos about this on my channel https://youtu.be/JKnfGYgCwL8

That is awesome Rockston! You really simplify it and that should be quite easy. I would have never figured that out. Thank you all for helping out! You are all awesome and I really appreciate it!