New comer - first post - Looking for any info about Kyoraku space ship

[Katendem]

Hello,
First of all, thank you and congratulations for this forum.
My name is Fab, living in Europe and fan of pachinko for a while but only get my very first today :-)
I found the piece on a Portuguese Island, from a old man who purchased it from a GI living Europe 25 years ago !
It looks complete and in good conditions.
I still did not check nor test it as it runs AC 110 volts when we have 230 volts by here.
I will go first for a complete cleaning.

I am looking for some help to identify the model and confirm the wiring and power for different elements :
> If you have idea about the model or any information about it, please share.
> Any information about the electrical is welcome :
>> the small transformer on the top might be for only for lights (6V, 9V ?)


Regards,
Fabrice




I did not check or test yet due to wired 110 volt when Europe is AC 230 volts ..

[Katendem]

A713EB89-C1C8-4D44-B05B-03A70648700C.jpeg0EB7E491-CCE4-4F97-A3E8-41C850CAA9BB.jpeg
hereby, pictures !

[Moparformances]

looks complete to me..

i would try and plug it in to a 110 mains plug.. do not plug it in to 220

and of course

Welcome to Pachitalk

[takethecastle57]

You have to get one of those 230vac to 110vac converters


https://www.amazon.com/ELC-T-2000-20...2s9dHJ1ZQ&th=1

[MrGneiss]

WELCOME!!!

The name of the machine may be on the back.. Can you post a closer pic of the stickers in the middle of the back??

And the stickers on the lower right on the front of he playfield may give a date..

[compirate]

Either:
スーバー
ワソター
or
スーパー
ワソター

[Katendem]

Hi!
bringing some news
i managed to get a 220-110 converter and ... got some lights
top lights (ball empty) and jackpot at zero
then launcher was dead until i changed the spring
motor is eratic but somehow working.
i will try to post a video.
I cheat by putting balls directly in some difficilt holes but no reaction out of some tulips moving.
Got almost 200 balls in the macjine and no return (the ones launched and lost got out on backside)

if anyone has an idea of the logic of the payout, i will appreciate !
i will allso post a pic of the backside

thanx for tour feedbacks
Fab

[Katendem]

FDE3FA2E-C94D-4A0F-A4F0-8EAE7680BB67.jpeg

[Katendem]

Got it !
8C449AF9-2912-430C-B9DD-818F7D61DA9A.jpeg

[compirate]

It's a Hanemono or 'Wing' type.

The three pockets at the bottom should be a '1' on the ends and a '2' in the middle. A ball into these pockets opens the wings in the center feature. Once for a '1', twice for a '2'. There should be a 'V' pocket in the center. If the ball lands in that, the bonus rounds start. The wings will open repeatedly, allowing somewhere between 10-15 balls to enter before that round ends, not sure the number of rounds (10 or more). The whole bonus thing starts again till the number of rounds finishes, then the bonus ends and you start all over again.


スーパー
ワソダー

Google Translate : Supermarket Wasoda

[takethecastle57]

One of the first things they taught me in the U.S. Signal Corps is make sure your connectors are clean.

For you you could work your connectors by unplugging and plugging them .

Tough corrosion on the pins in the connectors use a pencil eraser (either the one on the pencil or cut the big one into strips that fit into it .

[MrGneiss]

Here is a video of how it should work!!



https://www.youtube.com/watch?v=iTr9iJJLl8s

[Katendem]

Hi,
thanx for the movie, very usefull and motivating !
i have the exactly the same machine
- no sound (at all)
- no light
- only zero shown in the middle
- no bottom 1 2 1 lights
- no wings moving

i will go for a comple connexions cleaning and fuses check.

thank you !
Fab

[Katendem]

Additional info : i might not have enough balls as i have 250 by now.

[takethecastle57]

About 750 I find is a good amount.

[takethecastle57]

You might have to break out the multimeter and do some troubleshooting .

[Katendem]

Hi !
Breakdown multimer : you mean going through all connectors and check if i have current, right ?
thanx

[takethecastle57]

Well you can check like the speaker at were the cable starts to the speaker.

You might have to troubleshoot to the component.

https://m.youtube.com/watch?v=QFAWb1F_EpE

[takethecastle57]

Multimeter basics

https://m.youtube.com/watch?v=lo8MWr3NuuM

[Katendem]

@takethecastle57, thank you, i have a plan for the weekend !
i might not post before saturday or sunday but i will be back with some results.
great conversation so far !