Results 1 to 10 of 10

Thread: What's with all the DIY ball lifters

  1. #1
    Fever Hunter topper's Avatar
    Join Date
    Jan 2019
    Location
    Virginia
    Posts
    144
    Thanks
    17
    Thanks Received
    164

    Default What's with all the DIY ball lifters

    Both of my vintage machines are semi-cyclic and that works great for them. But I recently acquired a 1990's era early modern machine. It goes through balls so fast, I'm constantly shuffling them manually, and god forbid I actually hit "fever mode" there's just no hope of keeping up. So I find myself considering a ball lifter.

    I don't have any intention of dropping $400+ on a ball lifter, if I can even find one, on ebay. So I've been looking at a lot of DIY videos online. There are a few really sophisticated ones that look like they work great but are way too complicated for me to build. Those folks (god bless them) have put in way more than $400 worth of labor to create their one-of-a-kind ball lifter solution.

    The ones that appeal to me are a lot simpler. This one looks like it works a lot like the expensive real-deal ball lifters I occasionally see here and on ebay. https://www.youtube.com/watch?v=yB6Uiyw-Re0

    There's a link in the comments to some 3D files to build it (or something very like it). https://www.thingiverse.com/thing:2361236 Looks like you'd just add a switch and a motor. You can even have the parts printed in plastic or laser cut from wood. The price depends on the materials, but it ranges from $30-$100.

    There are a few out there in this same vein, but I don't see any of them actually built to completion. And I haven't seen them discussed here on PachiTalk. All of which makes me think there's some fatal flaw to this approach that everyone (but me) has already figured out. I mean if there were a way to build a ball lifter for under $100, most of us would probably have one right?

    Has anyone tried to build one of these? Has anyone seen one that actually works?

  2. #2
    Fever Hunter topper's Avatar
    Join Date
    Jan 2019
    Location
    Virginia
    Posts
    144
    Thanks
    17
    Thanks Received
    164

    Default Re: What's with all the DIY ball lifters

    Well, I just found this: http://www.pachitalk.com/forums/show...296&viewfull=1

    Appears to be the same lifter as the video linked above. That threads more than 2 years old

  3. #3
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    28,960
    Thanks
    58,137
    Thanks Received
    37,537

    Default Re: What's with all the DIY ball lifters

    There has been talk about building DIY ball lifters all 15 years that I've been here, even when the orange ones were cheap, but very few have made much progress..

    I feel there is probably a relatively easy and inexpensive way to build something at home that can move some tiny balls a couple feet, but we just haven't figured it out yet!!

    I mean there are 60+ year old machines that have hand cranked ball lifters..Surly there's enough parts at Home Depot to get it done??

    "Blowing smoke rings at the moon."

  4. #4
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    24,186
    Thanks
    11,483
    Thanks Received
    15,576

    Default Re: What's with all the DIY ball lifters

    The greatest DIY one was the balldozer.
    Ian #UKPachinko

  5. The following 3 users say "Thanks" to Drunkenclam


  6. #5
    Master Inventor daverob's Avatar
    Join Date
    Nov 2005
    Location
    Brighton, UK
    Posts
    1,289
    Thanks
    1,879
    Thanks Received
    6,788

    Default Re: What's with all the DIY ball lifters

    It's easy to make a ball lifter, it's hard to make one that doesn't jam up all the time.

    One of these days I'll revisit the ball lifter in the video in the first post. I have my own laser cutter now, so there's no excuse for putting it off (except time!).

  7. The following 3 users say "Thanks" to daverob


  8. #6
    Fever Hunter topper's Avatar
    Join Date
    Jan 2019
    Location
    Virginia
    Posts
    144
    Thanks
    17
    Thanks Received
    164

    Default Re: What's with all the DIY ball lifters

    Quote Originally Posted by daverob View Post
    It's easy to make a ball lifter, it's hard to make one that doesn't jam up all the time.

    One of these days I'll revisit the ball lifter in the video in the first post. I have my own laser cutter now, so there's no excuse for putting it off (except time!).
    Thanks! Any experience with the files I linked to on Thingverse?

  9. #7
    Pachi Puro naha13's Avatar
    Join Date
    Jan 2011
    Location
    Utah
    Posts
    3,860
    Thanks
    3,038
    Thanks Received
    2,695

    Default Re: What's with all the DIY ball lifters

    Anyone tried to make one with external magnets to pull the balls up? No ball contact with gears, would just need to move away from the tube/chute at the top to release them into a tray. Just thinking outside the gear box. Seems the internal gear drive has been the limiting factor up to now.
    Pachinko -Nishijin "C" Fishing Game & Hockey, Red Lions, CR Red Lions, Heiwa Double Wing, Takao Bruce Lee, SanseiR&D 777 Sevens Rock, Sankyo Wanted!, lots of other vintages!; Pachislo -SPIN LUCK, Kung Fu Lady, Gamera High Grade, Gundam

  10. The following user says "Thanks" to naha13


  11. #8
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    28,960
    Thanks
    58,137
    Thanks Received
    37,537

    Default Re: What's with all the DIY ball lifters

    Quote Originally Posted by naha13 View Post
    Anyone tried to make one with external magnets to pull the balls up? No ball contact with gears, would just need to move away from the tube/chute at the top to release them into a tray. Just thinking outside the gear box. Seems the internal gear drive has been the limiting factor up to now.
    There have been some pachis that used magnets to move balls on the playfield so it should work..But I would think if balls stayed on the magnets too long and became magnetized, there could be balls sticking together issues!!

    "Blowing smoke rings at the moon."

  12. The following user says "Thanks" to MrGneiss


  13. #9
    Fever Hunter topper's Avatar
    Join Date
    Jan 2019
    Location
    Virginia
    Posts
    144
    Thanks
    17
    Thanks Received
    164

    Default Re: What's with all the DIY ball lifters

    I think the balls would get magnetized pretty quickly.

    I haven't seen anyone try to build something like the marble lifters they sell for kids. Those use a chain and some scoops to carry the balls. Might be too slow.

    3d printing has come a long way in a short time. You can get the lifter I linked to earlier printed in all sorts of materials including ABS plastic or laser cut from wood.

  14. #10
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    24,186
    Thanks
    11,483
    Thanks Received
    15,576

    Default Re: What's with all the DIY ball lifters

    The Daito ball lifts use the chain link and scoop to lift the balls and they are extremely rare.

    http://www.pachitalk.com/forums/show...ighlight=Daito
    Ian #UKPachinko

  15. The following 4 users say "Thanks" to Drunkenclam


Similar Threads

  1. WTB ball lifters
    By MGB1977 in forum Members Trade area
    Replies: 3
    Last Post: 08-07-2018, 02:41 PM
  2. Ball Lifters/Ball Management Forum!!
    By MrGneiss in forum Ball Lifters/Ball Management
    Replies: 11
    Last Post: 04-16-2014, 05:10 PM
  3. Replies: 4
    Last Post: 09-26-2013, 09:32 PM
  4. Ball Lifters
    By RaymondV in forum eBay - General Auction listings
    Replies: 3
    Last Post: 08-24-2009, 12:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •