Results 1 to 6 of 6

Thread: TAKASAGO-Dream Seven Max

  1. #1
    Tokie Owens Mojos66's Avatar
    Join Date
    Oct 2019
    Location
    St Louis
    Posts
    2
    Thanks
    0
    Thanks Received
    5

    Default TAKASAGO-Dream Seven Max

    Hello everyone,

    Thanks for the add. I am new to Pachislo machines and picked up a Takasago Dream Seven Max yesterday from a flea market. The seller had no information on it and was unsure if it even worked. I was given a hand full of tokens and a key to open the machine that did not work.

    I was able to open the machine and turn on the power. Lights and sounds seemed to all work but when I put a token in it went straight through to the return. I noticed a HA code and with a bit of research I learned it meant the hopper was low. I filled the hopper with all the tokens (about 30) and read on how to do a reset (performed several). The hopper does turn manually so it's not seized and the token chute(sorry don't know the exact terminology) seems to be clear. The tokens still drop straight through. I even took that part off and slowly worked a token through.

    Can anyone give me a bit of advice on what procedures are needed to fix this. I've looked online and on this forum. I have not come across anything that helps. Saw some videos of the same problem but they were of different machines and were not helpful.

    Thanks in advance for any assistance.


    Mojo

  2. #2
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    28,608
    Thanks
    57,809
    Thanks Received
    37,207

    Default Re: TAKASAGO-Dream Seven Max

    WELCOME!!!

    Did the error go away?? You may just need more tokens?? Sorry, I'm not much help with pachislos, but it's often helpful if you can post some pics inside and out of places that may be causing problems!!

    http://www.pachitalk.com/forums/show...-Post-Pictures

    "Blowing smoke rings at the moon."

  3. The following user says "Thanks" to MrGneiss


  4. #3
    Tokie Owens Mojos66's Avatar
    Join Date
    Oct 2019
    Location
    St Louis
    Posts
    2
    Thanks
    0
    Thanks Received
    5

    Default Re: TAKASAGO-Dream Seven Max

    Thanks MrGneiss,

    I thought that might be the issue too. Last night I took out the token chute again and cleaned it up. I also took out the hopper and cleaned that along with wiping down the reals. After checking all the wire connections, putting everything back together, and performing another reset the machine is operating as it should. Not sure what was wrong but it's fixed now.


    IMG-20191007-183720096.jpgIMG-20191007-184112865.jpgIMG-20191007-183606712.jpgIMG-20191007-183641389.jpgIMG-20191007-183903859.jpgIMG-20191007-184010607.jpg

  5. The following 5 users say "Thanks" to Mojos66


  6. #4
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    28,608
    Thanks
    57,809
    Thanks Received
    37,207

    Default Re: TAKASAGO-Dream Seven Max


    "Blowing smoke rings at the moon."

  7. #5
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    23,993
    Thanks
    11,397
    Thanks Received
    15,464

    Default Re: TAKASAGO-Dream Seven Max

    None of the pachislos I have, have had a low token sensor. They basically run till empty until when they don't detect a token coming out when the wheel is spinning and go into error. If it's working now. It was probably either a dirty or blocks optical sensor on the hopper output slot. Or a poor wiring connection. Or just needed a good reset.
    Ian #UKPachinko

  8. The following user says "Thanks" to Drunkenclam


  9. #6
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,530
    Thanks
    24,095
    Thanks Received
    10,918

    Default Re: TAKASAGO-Dream Seven Max

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

Similar Threads

  1. Need help with my Takasago TDC PSL-005
    By TheBigOnion in forum Pachislo Technical Support Tickets
    Replies: 4
    Last Post: 07-05-2018, 03:46 PM
  2. HA error code on Takasago Dream 7 Max
    By djaypee in forum Pachislo Modifications
    Replies: 10
    Last Post: 02-27-2006, 04:28 AM
  3. Dream Dream World moving up!
    By azlew in forum Model Talk
    Replies: 10
    Last Post: 11-01-2005, 10:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •