Results 1 to 8 of 8

Thread: Mog Mog reset help

  1. #1
    Tokie Owens alan11mad's Avatar
    Join Date
    Jul 2019
    Location
    NJ
    Posts
    3
    Thanks
    0
    Thanks Received
    0

    Default Mog Mog reset help

    I have a super mog mog with a "cr" error. I was wondering if someone can tell me the what the error message means? And, what is the proper reset method?

  2. #2
    Fever Hunter atlanticom's Avatar
    Join Date
    May 2019
    Location
    United States
    Posts
    110
    Thanks
    85
    Thanks Received
    164

    Default Re: Mog Mog reset help

    On my Bellco machine 'Cr' means coin rejected - machine thinks it's an invalid coin, or going the wrong direction or whatever. I received that error due to a defective coin sensor (photo-interrupter) in the coin chute. All advice I've read says to try cleaning the sensors with alcohol in order to remove dust/dirt that may be blocking the transmission of light from one side of the sensor to the other. It has also been suggested to make sure the coin chute is clear of debris so the token can pass through with proper timing. Hopefully that's all you'll need to do.

    On my machine, I simply needed to push the reset button to clear the error. Here's a picture of my board removed from the machine. (I'm actually in the process of replacing my sensors. The parts came in yesterday

    IMG_7508.JPG

  3. The following user says "Thanks" to atlanticom


  4. #3
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,336
    Thanks
    51,524
    Thanks Received
    30,712

    Default Re: Mog Mog reset help



    The hard reset involves the odds setting too, all as follows:

    "How To Set the Skill Levels of Your Pachislo
    HOW CHANGE ODDS:

    "TURN YOUR MACHINE OFF FIRST"

    1. Locate internal key switch, and insert key.
    Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

    2. Turn "reset" key switch to on, to access programming mode.

    3. Turn on machine now.

    4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door.

    5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

    6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, and depress both "BET CREDITS" and "COLLECT CREDITS" buttons to lock odds level into machine memory.

    7. Turn "reset" key back to off.

    8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.



    Also just to confirm some additional info regarding hard reset

    Two switches on the power supply:
    - One requires a soft reset at the end of a bonus.
    - The other pays out all tokens at the end of a bonus.

    For these switches in most cases off is in the down or right position. The for off and on are:

    無 = off

    有 = on


    and Welcome to PachiTalk
    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  5. The following user says "Thanks" to hanabi


  6. #4
    Fever Hunter atlanticom's Avatar
    Join Date
    May 2019
    Location
    United States
    Posts
    110
    Thanks
    85
    Thanks Received
    164

    Default Re: Mog Mog reset help

    FYI: On my Bellco, only a soft reset was necessary. A soft reset from the door keyswitch or pushing the reset button on the power supply both cleared 'Cr' error. However, your machine may be different.

  7. #5
    Fever Hunter atlanticom's Avatar
    Join Date
    May 2019
    Location
    United States
    Posts
    110
    Thanks
    85
    Thanks Received
    164

    Default Re: Mog Mog reset help

    Quote Originally Posted by atlanticom View Post
    FYI: On my Bellco, only a soft reset was necessary. A soft reset from the door keyswitch or pushing the reset button on the power supply both cleared 'Cr' error. However, your machine may be different.
    I was referring only to the 'Cr' error. Hanabi's response is perfect for a machine hard reset! Sorry if I inadvertently implied otherwise

  8. #6
    Tokie Owens alan11mad's Avatar
    Join Date
    Jul 2019
    Location
    NJ
    Posts
    3
    Thanks
    0
    Thanks Received
    0

    Default Re: Mog Mog reset help

    let me go try the hard reset. the soft reset, that is pushing the reset button did not reset the machine. I suspect the error code was generated by the "Big Win". I will post pics when I return. thanks for the reply.

  9. #7
    Tokie Owens alan11mad's Avatar
    Join Date
    Jul 2019
    Location
    NJ
    Posts
    3
    Thanks
    0
    Thanks Received
    0

    Default Re: Mog Mog reset help

    I did the hard reset suggested above. then I played the game until the Bonus Game win. afterwards, I received the "of" error. I still had 50 credits but the game did not allow me to pay out the credits. the soft reset did not work. so I did the hard reset, but lost the credits. IMG_1490.JPGIMG_1487.JPGIMG_1486.JPG

  10. #8
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,314
    Thanks
    67,901
    Thanks Received
    44,921

    Default Re: Mog Mog reset help

    The two switches above the three fuses aren't labeled on and off like other machines as far at I can tell (if they are the switches I'm thinking of), I tried to translate with my phone but coudn't totally figure it out, but you may want to try flipping the left switch..that May stop it needing a reset after bonuses!!

    Be warned, I really don't know what I'm talking about!!

    Someone that can actually read Japanese might be more useful!!

    "Blowing smoke rings at the moon."

Similar Threads

  1. Needs to be reset?
    By Alan13 in forum Model Talk
    Replies: 16
    Last Post: 04-05-2014, 05:00 AM
  2. Reset Key
    By FloridaCreative in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 01-02-2011, 05:18 PM
  3. Don't have the reset key
    By wilbr in forum Pachislo Technical Support Tickets
    Replies: 9
    Last Post: 12-29-2009, 09:08 AM
  4. Won't Reset
    By congdont in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 12-26-2006, 06:46 AM
  5. Replacing reset switch with reset key
    By RKnarr01 in forum Pachislo Modifications
    Replies: 12
    Last Post: 02-27-2005, 09:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •