Results 1 to 7 of 7

Thread: Sankyo 1975 Type General Wiring suggestions.

  1. #1
    Tokie Owens jasper's Avatar
    Join Date
    Jun 2019
    Location
    Montgomery Al
    Posts
    3
    Thanks
    0
    Thanks Received
    5

    Default Sankyo 1975 Type General Wiring suggestions.

    I ordered a wiring kit from EBay and it came in yesterday. The machine has 3 wire plug. It looks to me red is positive, black is negative, and white is ground which is not need. Should I do 1. Just shove the battery wires into the plug and if works leave alone. 2. Clip the 3 plug plastic thingy, flux and solder the wires. Test the wire and when works just solder the battery wires to the machine wire. Then Heat shrink and be done. 3. Clip the 3 plug. Find a two post attachment like most Nishijin B models I have seen. Mount the post. Attach machine wire to post. Screw battery wire to post. Thanks. Ps. Find the solder iron.
    Attached Images Attached Images

  2. The following user says "Thanks" to jasper


  3. #2
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,469
    Thanks
    1,027
    Thanks Received
    1,089

    Default Re: Sankyo 1975 Type General Wiring suggestions.

    I would cut off the connector, connect battery to the Red and white wires. Black not required, parlor signal.

  4. The following user says "Thanks" to Tink


  5. #3
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,992
    Thanks Received
    10,874

    Default Re: Sankyo 1975 Type General Wiring suggestions.

    option 2 would be my choice

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  6. #4
    Tokie Owens jasper's Avatar
    Join Date
    Jun 2019
    Location
    Montgomery Al
    Posts
    3
    Thanks
    0
    Thanks Received
    5

    Default Re: Sankyo 1975 Type General Wiring suggestions.

    Thanks. Now I have to wait for a soldering iron to come in. I also have a 1970 Nishijin recycler. I am planning on getting with one of my friends who has a 3d printer and extend the ball drop on Sankyo. Some times the ball bounces out of the tray and becomes a cat toy.

  7. #5
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,469
    Thanks
    1,027
    Thanks Received
    1,089

    Default Re: Sankyo 1975 Type General Wiring suggestions.

    Quote Originally Posted by jasper View Post
    Some times the ball bounces out of the tray and becomes a cat toy.

    I use drawer liner material in the tray to absorb the bounce.

  8. The following 2 users say "Thanks" to Tink


  9. #6
    Tokie Owens jasper's Avatar
    Join Date
    Jun 2019
    Location
    Montgomery Al
    Posts
    3
    Thanks
    0
    Thanks Received
    5

    Default Re: Sankyo 1975 Type General Wiring suggestions.

    I got it wired. I had to clean the ball out switch but that works now. Now I have tear it down to clean the jackpot light switch. But that can wait for later. Thanks for the helpful suggestions.

  10. The following 4 users say "Thanks" to jasper


  11. #7
    Blind Shooter Mr.Lazo's Avatar
    Join Date
    Apr 2019
    Location
    FL
    Posts
    64
    Thanks
    33
    Thanks Received
    105

    Default Re: Sankyo 1975 Type General Wiring suggestions.

    A good disassembly will also give you a chance to clean out the decades of accumulated schmutz from the back-end works. It may seem like a pain in the tuchus, but it will save you a lot of trouble in the long-run!

  12. The following user says "Thanks" to Mr.Lazo


Similar Threads

  1. Restored: 1975 Sankyo Flip-cup
    By Rival in forum Vintage Pachinko
    Replies: 6
    Last Post: 06-15-2016, 12:20 PM
  2. Restored with cabinet, 1975 Sankyo
    By Rival in forum Vintage Pachinko
    Replies: 0
    Last Post: 03-02-2016, 12:39 PM
  3. Sankyo 1975 ash tray
    By Antenna3 in forum Members Trade area
    Replies: 1
    Last Post: 11-06-2015, 01:28 AM
  4. 1975 Sankyo pachinko restored ebay buy
    By lotsoballs in forum eBay - General Auction listings
    Replies: 2
    Last Post: 12-17-2014, 09:35 PM
  5. 1975 Sankyo with nice case
    By Rival in forum Vintage Pachinko
    Replies: 4
    Last Post: 07-15-2011, 04:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •