Results 1 to 15 of 15

Thread: Tulip help

  1. #1
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    16
    Thanks
    27
    Thanks Received
    16
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Tulip help

    This is the new Nishijin. Everything is working well except for the middle tulip. Balls get stuck there and won't fall to the right like they should. You can see a ball stuck in middle photo. Nothing is wrong with the tulip itself. The only think I see inside the pocket is the arm that opens the side tulips. That moves and easily opens the tulips when I move it manually so I think it is functioning like it should, but it is the only thing I see there. You can see it in the last photo. Thoughts? Thanks

    IMG_4980.jpgIMG_4978.jpgIMG_4984.jpg

  2. #2
    Fever Hunter Rumpled's Avatar
    Join Date
    Jun 2018
    Location
    New Jersey
    Posts
    149
    Thanks
    212
    Thanks Received
    174
    Groans Given
    13
    Groaned 1 Time in 1 Post

    Default Re: Tulip help

    First thing to try is a q-tip (or 3) with glass cleaner, and carefully clean inside the tulip as there may be something sticky. I usually take a small cup, spray a bit in there and dip the cotton in there, press off excess and then gently rub.

    Just so you know, my first machine is nick named “skittles” as some child loaded it with skittles, and I found them everywhere in the dang machine, so it is possible to have sticky things or rusty things gum up the works. If a few q-tips clear it up, yippee, otherwise you have to remove the tulip and see if a ball got under it, if it got bent, a stray candy, or other.

    Post back after a gentle clean.
    Jewelry Metalworking, Chainmaille, Pachinko
    Pliers make me happy

  3. #3
    Blind Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    63
    Thanks
    28
    Thanks Received
    82
    Groans Given
    0
    Groaned 1 Time in 1 Post

    Default Re: Tulip help

    How about some pictures of the tulip?

  4. #4
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    16
    Thanks
    27
    Thanks Received
    16
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Tulip help

    I thought the photos were showing up. I have taken the tulip out and cleaned it. Seems to work fine when out of the machine.

    Skittles? Why didn't I think of that? Could have saved money on new balls.
    Attached Images Attached Images

  5. The following user says "Thanks" to dghodge


  6. #5
    Blind Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    63
    Thanks
    28
    Thanks Received
    82
    Groans Given
    0
    Groaned 1 Time in 1 Post

    Default Re: Tulip help

    I should have specified pictures of the back, sides, top of the tulip.

  7. #6
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    16
    Thanks
    27
    Thanks Received
    16
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Tulip help

    Doh, that make sense.
    Attached Images Attached Images

  8. #7
    Blind Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    63
    Thanks
    28
    Thanks Received
    82
    Groans Given
    0
    Groaned 1 Time in 1 Post

    Default Re: Tulip help

    Great pictures. Did you swap tulips at some point, perhaps accidentally?

    OR--is the stick coming off the reset ramp thingy interfering with the linkage that is supposed to trigger it?

  9. #8
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,198
    Thanks
    886
    Thanks Received
    846
    Groans Given
    0
    Groaned 2 Times in 2 Posts

    Default Re: Tulip help

    Is the ball sticking. When the tulip is open or closed? If it is when open you may need to bend the 2 prongs open more so the ball goes through.

  10. The following 2 users say "Thanks" to Tink


  11. #9
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,057
    Thanks
    23,269
    Thanks Received
    10,611
    Groans Given
    671
    Groaned 158 Times in 104 Posts

    Default Re: Tulip help

    Quote Originally Posted by Tink View Post
    Is the ball sticking. When the tulip is open or closed? If it is when open you may need to bend the 2 prongs open more so the ball goes through.
    but not so far and to cause the tulip not to operate.. est 11.25 mm apart
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  12. The following 2 users say "Thanks" to Moparformances


  13. #10
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    16
    Thanks
    27
    Thanks Received
    16
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Tulip help

    Balls get stuck when tulip is closed or open. And now I’m stuck and can’t figure it out. I widened the tulip opening as much as possible. It seems the ball is blocked by the arm that opens the left and right tulips. The arm comes down when a ball lowers the stick on the tulip. Does anyone have a Nishijin where a ball in the upper middle tulip opens the left and right? My other Nishijin is different, a ball in the left or right opens the middle.

  14. #11
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,198
    Thanks
    886
    Thanks Received
    846
    Groans Given
    0
    Groaned 2 Times in 2 Posts

    Default Re: Tulip help

    It is usually mechanics mounted on the back of the cell. You may need to disassemble the back to find out whats holding things up.

  15. #12
    Blind Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    63
    Thanks
    28
    Thanks Received
    82
    Groans Given
    0
    Groaned 1 Time in 1 Post

    Default Re: Tulip help

    I'm pretty sure I have one that works that way, but it will take a while for me to dig it out...so let me ask this, just for clarity:

    have you tested the tulip out of the machine? How does it function out of the machine?

    If it functions correctly, address some issue in the machine. If it does not function, take a closer look at the tulip.

    Did you swap tulips, perhaps accidentally, at some point?

  16. The following user says "Thanks" to machgo


  17. #13
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    16
    Thanks
    27
    Thanks Received
    16
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Tulip help

    The tulip works perfectly out of the machine. I didn't swap tulips but maybe someone did before me. I will try swapping them and see what happens. This tulip has a rod on the left that pushes down a lever, that opens the left and right tulips. This same lever is preventing the ball from falling to the right.

  18. #14
    Blind Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    63
    Thanks
    28
    Thanks Received
    82
    Groans Given
    0
    Groaned 1 Time in 1 Post

    Default Re: Tulip help

    Assuming the tulip is correctly placed in the machine (not swapped), I would look for interference between the tulip lever and linkage in the machine.

  19. The following user says "Thanks" to machgo


  20. #15
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,057
    Thanks
    23,269
    Thanks Received
    10,611
    Groans Given
    671
    Groaned 158 Times in 104 Posts

    Default Re: Tulip help

    Quote Originally Posted by machgo View Post
    Assuming the tulip is correctly placed in the machine (not swapped), I would look for interference between the tulip lever and linkage in the machine.
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

Similar Threads

  1. pre 1965 tulip-less
    By Drunkenclam in forum Yahoo Japan - Auction Area
    Replies: 5
    Last Post: 05-12-2012, 03:45 PM
  2. Adjustable Tulip?
    By tommy4132 in forum Vintage Pachinko
    Replies: 6
    Last Post: 10-31-2011, 02:25 PM
  3. Introduction of the tulip
    By Rival in forum Vintage Pachinko
    Replies: 2
    Last Post: 04-13-2011, 10:04 PM
  4. Sticking Tulip
    By ptofimpact in forum Vintage Pachinko
    Replies: 14
    Last Post: 03-03-2011, 10:38 AM
  5. make a tulip??
    By TilionMtl in forum Vintage Pachinko
    Replies: 24
    Last Post: 07-07-2010, 02:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •