I am in the last steps... I noted when I took apart my dolphin machine that the lever was bent a bit, but it seemed to be okay. Now putting it back together, I realize looking at other machines it is missing parts (like a lock washer) and it is just not... going together but I also can’t get it off because it is bent.

E076B2C8-0D9C-4A76-AC54-80641AB75BB3.jpeg The main thing is bent...

When I install the flipper in front, it hits the wall in front! I can’t get it off the wall!
BFAD1EED-BB00-4D1C-9C0E-AE933D906D52.jpeg
Instead of sliding neat in the slot, it hits the races... (ugh, I need to tap in a few things better!)
Is my only option sawing this thing off? I tried to take the nut off that holds it on, and someone messed with it before, and it must be the wrong size, it is completely seized.

And I put my cel on too high.

Note to others... if you have to glue your field layers back together, pre-drill your race holes before putting on your cel. All mine lined up but the glue filled two.