Results 1 to 9 of 9

Thread: Looking for more info on my SANKYO machine!

  1. #1
    Tokie Owens DwyerJustin's Avatar
    Join Date
    Jul 2018
    Location
    Florida
    Posts
    3
    Thanks
    3
    Thanks Received
    0

    Default Looking for more info on my SANKYO machine!

    Acquired this machine years ago, looks to be in decent shape. Trying to get more information on it and how to go about getting a power cord. FYI I know absolutely nothing about pachinko machines. Link to pictures below. Any help would be greatly appreciated!

    https://imgur.com/gallery/NBRaiet

  2. #2
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Looking for more info on my SANKYO machine!

    1st - These games are 24V AC. You'll need a 120VAC to 24VAC transformer. What ever you do, don't connect it directly to an outlet, you'll let the magic smoke out!

    In your third pic, upper right hand corner, the black connector with the two spade connectors in it is the power in. Not sure how easy it will be to find a matching connector will be.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  3. The following 4 users say "Thanks" to compirate


  4. #3
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Looking for more info on my SANKYO machine!

    You sort of answered the question Compirate. In the past I used a set of crimped spade connectors and put a dab of hot glue to prevent them from being pulled out. Of course. This means the lead is permanent.
    Ian #UKPachinko

  5. The following 2 users say "Thanks" to Drunkenclam


  6. #4
    Tokie Owens DwyerJustin's Avatar
    Join Date
    Jul 2018
    Location
    Florida
    Posts
    3
    Thanks
    3
    Thanks Received
    0

    Default Re: Looking for more info on my SANKYO machine!

    I assumed that's where it connected. I also know zero about electrical! Guess I need to do some research. I just want to see this bad boy lit up.

  7. #5
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Looking for more info on my SANKYO machine!

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. #6
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Looking for more info on my SANKYO machine!

    The name in Japanese is ウォーリアーII Warrior 2

    Your best google searches are:
    ウォーリアーII 三共
    ウォーリアーII Sankyo
    ウォーリアーII パチンコ

    Made by Sankyo (duh ), 11/1989

    Found a video

    You could use insulated spade connectors, just be sure to use 24VAC! We've seen too many of these fried, this looks like a nice one.

    This is a hanemono (wing type) game. You get a ball into one of the three pockets at the bottom and the 'wings' on the center-feature open (once for a 1, twice for a 2). If a ball goes down the center (the 'V' pocket) the game goes into bonus mode. The wings will open a lot. Not sure if there are multiple bonus rounds or not. Listed as an All 13, which means every winning ball for any pocket pays 13 balls.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  9. The following 4 users say "Thanks" to compirate


  10. #7
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,235
    Thanks
    4,680
    Thanks Received
    4,663

    Default Re: Looking for more info on my SANKYO machine!

    I have a machine in the same frame. When the glass door is opened, a small tab on one end presses down and the lower tray opens like a door. Inside, is a 3 position volume switch. It is reasonably effective...as compared to others. There is only one speaker, in the end of the payout tray.

  11. The following 2 users say "Thanks" to pachiwall


  12. #8
    Tokie Owens DwyerJustin's Avatar
    Join Date
    Jul 2018
    Location
    Florida
    Posts
    3
    Thanks
    3
    Thanks Received
    0

    Default Re: Looking for more info on my SANKYO machine!

    That video is killer!! Always imagined what it looked like in operation. I've got the balls and everything, just need to see if this bad boy powers up.

    Many thanks!

  13. #9
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Looking for more info on my SANKYO machine!

    We aims to please!

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

Similar Threads

  1. Sankyo Flying Carpet - Newb Needs help/machine info/advice on repairs
    By Cheverisi in forum Pachinko Technical Support Tickets
    Replies: 14
    Last Post: 06-05-2013, 12:39 PM
  2. Replies: 0
    Last Post: 08-17-2012, 12:44 AM
  3. Machine Info please Sankyo Parasole Man
    By ebb in forum Modern Pachinko
    Replies: 15
    Last Post: 12-31-2010, 01:24 PM
  4. Need info on unidentified Sankyo machine.
    By alverdine in forum Modern Pachinko
    Replies: 23
    Last Post: 11-15-2009, 07:32 PM
  5. Looking for info on a 93 Sankyo
    By DugFreez in forum Modern Pachinko
    Replies: 2
    Last Post: 05-21-2009, 01:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •