Hope somebody can shed some light on this problem.
I have a Sankyo High Performance machine that I've restored about 75% and it works quite well. However, I've noticed a number of lights don't light up. Below is a picture of the machine. The black X's denote an area where the light doesn't work. Yellow X is a good light.

The bar at the top of the machine contains 6 LED's. I've checked the continuity of the bulbs and the wire from the main PC board up to the lights also has continuity. That one has me stumped. The others are a bit harder to get at with out some disassembly. I don't see any pinched wires anywhere.

Bad bulbs? If so, anybody know where to get replacements?

Thanks for any help you can provide.

Magic Dan
Magic Pachinko Restorations on FaceBook

DSC_0001.JPGDSC_0002.JPG

For some reason the pic I took with the black and yellow X's won't upload. The lower lights work (3 in the middle and the 2 pay pockets) None of the upper lights work. Two on the sides, 2 pay pockets and 2 spinners plus the 6 lights at the top of the unit.