Results 1 to 8 of 8

Thread: New to pachislo

  1. #1
    Tokie Owens acontello81's Avatar
    Join Date
    Jun 2018
    Location
    Bath, NY
    Posts
    3
    Thanks
    5
    Thanks Received
    0

    Default New to pachislo

    Hi folks. Just picked up my second machine and having a heck of a time resetting it. Any advice?

    Sent from my VS501 using Tapatalk

  2. #2
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,333
    Thanks
    51,524
    Thanks Received
    30,711

    Default Re: New to pachislo

    Hello

    Have you tried the full reset procedure, sometimes referred to as the 'hard reset' which involves setting the odds too?

    if you're not sure, here are the steps:

    "How To Set the Skill Levels of Your Pachislo
    HOW CHANGE ODDS:

    "TURN YOUR MACHINE OFF FIRST"

    1. Locate internal key switch, and insert key.
    Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

    2. Turn "reset" key switch to on, to access programming mode.

    3. Turn on machine now.

    4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door.

    5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

    6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, and depress both "BET CREDITS" and "COLLECT CREDITS" buttons to lock odds level into machine memory.

    7. Turn "reset" key back to off.

    8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.



    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  3. The following 5 users say "Thanks" to hanabi


  4. #3
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,308
    Thanks
    67,899
    Thanks Received
    44,913

    Default Re: New to pachislo

    WELCOME!!!

    "Blowing smoke rings at the moon."

  5. The following user says "Thanks" to MrGneiss


  6. #4
    Tokie Owens acontello81's Avatar
    Join Date
    Jun 2018
    Location
    Bath, NY
    Posts
    3
    Thanks
    5
    Thanks Received
    0

    Default Re: New to pachislo

    Thank you for the quick reply. As shown in my photo, my machine doesn't have a reset key. I've tried several combinations using the power switch and other buttons, but no luck. I was able to figure out that the green button changes the odds, but still can't seem to do a hard reset. I've searched a bit, but can't seem to find any helpful photos with a power supply similar to this one. Any thoughts on the buttons/switches? Thanks!

  7. #5
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: New to pachislo

    Give us a clear pic of the inside of the door, and inside of the case please

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  8. The following user says "Thanks" to compirate


  9. #6
    Tokie Owens acontello81's Avatar
    Join Date
    Jun 2018
    Location
    Bath, NY
    Posts
    3
    Thanks
    5
    Thanks Received
    0

    Default Re: New to pachislo

    I took this photo of the power supply. I'm at work right now, so I can't get a photo of the inside of the door. I can get one this evening.

    power.jpg

  10. #7
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    6,029
    Thanks
    6,576
    Thanks Received
    3,677

    Default Re: New to pachislo

    Hello acontello81 and welcome to the group

    I believe the rocker switch next to the green button is in place of a settings key. While looking at the reset process from Hanabi think of this switch as the key. The 'ON' position is how it looks in your picture. You may need to do this a process a couple of times and following it word for word in your actions.

  11. The following 2 users say "Thanks" to Peteybob


  12. #8
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: New to pachislo

    Welcome Aboard


    Ian #UKPachinko

Similar Threads

  1. Replies: 0
    Last Post: 12-14-2013, 10:31 AM
  2. Replies: 6
    Last Post: 11-07-2013, 10:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •