Results 1 to 16 of 16

Thread: Pulled the old Nishijin out of the garage

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    7
    Thanks
    13
    Thanks Received
    8
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Pulled the old Nishijin out of the garage

    I have had this machine since I was a kid, around 1977. It has followed me around since and I have wanted to clean it up for years. I wiped off the dust and it works perfectly. I threw away some rusty balls and a few that were too large, causing jams. What does it need to really make it shine? I need a new upper right bumper. I read you can carve one out of an eraser. There is some rust inside the outer glass frame. The inner plexiglass is cloudy in the middle. I polished the nail heads. Too bad the playing field has water damage but I guess it could be worse.

    Which bulb is brighter with a 9v battery? The 7.5v or the 12v?

    Iím glad this forum is here. It is a fun game to play. You can tell it was designed to slowly take your balls but to have enough jackpots to keep you interested.
    Attached Images Attached Images

  2. The following 4 users say "Thanks" to dghodge


  3. #2
    Tokie Owens Traveller's Avatar
    Join Date
    Jun 2018
    Location
    Idaho
    Posts
    11
    Thanks
    0
    Thanks Received
    23
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Wow, I just picked up one of those this weekend! The field graphic is different, but the machine is the same. Ours is a 1976 going by the stickers and stamps.

  4. The following user says "Thanks" to Traveller


  5. #3
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    3,910
    Thanks
    3,335
    Thanks Received
    1,917
    Groans Given
    0
    Groaned 32 Times in 16 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Hello dghodge and welcome to the group

  6. The following user says "Thanks" to Peteybob


  7. #4
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    7
    Thanks
    13
    Thanks Received
    8
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    the back
    Attached Images Attached Images

  8. The following user says "Thanks" to dghodge


  9. #5
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,095
    Thanks
    777
    Thanks Received
    776
    Groans Given
    0
    Groaned 1 Time in 1 Post

    Default Re: Pulled the old Nishijin out of the garage

    Quote Originally Posted by dghodge View Post
    Which bulb is brighter with a 9v battery? The 7.5v or the 12v?.
    Neat machine. The 7.5 would be brighter but will have a shorter life due to over voltage.

  10. The following user says "Thanks" to Tink


  11. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    22,116
    Thanks
    10,608
    Thanks Received
    14,522
    Groans Given
    356
    Groaned 143 Times in 101 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Oh. It's a "No More War"

    As above. 7.5v batteries will be brighter. But will burn out quicker and generate more heat. This could be a problem with the surrounding plastics. Especially on the low ball light.

    Best stick to 12v bulbs and prolong the life.
    Ian #UKPachinko

  12. The following 2 users say "Thanks" to Drunkenclam


  13. #7
    Tokie Owens Traveller's Avatar
    Join Date
    Jun 2018
    Location
    Idaho
    Posts
    11
    Thanks
    0
    Thanks Received
    23
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Looks pretty similar other than the art/background. That's cool that we both just signed up with the same machine.

  14. #8
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    11,916
    Thanks
    23,033
    Thanks Received
    10,492
    Groans Given
    670
    Groaned 151 Times in 99 Posts

    Default Re: Pulled the old Nishijin out of the garage

    nice looking machine..

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  15. The following user says "Thanks" to Moparformances


  16. #9
    Tokie Owens cait001's Avatar
    Join Date
    Jun 2018
    Location
    Ontario
    Posts
    9
    Thanks
    0
    Thanks Received
    11
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Did you find any solution to getting new rubbers ordered and installed? I need some too...

  17. #10
    Tokie Owens ajbibb's Avatar
    Join Date
    Jun 2018
    Location
    Vermont
    Posts
    1
    Thanks
    0
    Thanks Received
    0
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    New here, but figured I'd chime in on the new bumpers question. I've ordered replacement parts (bumpers and stickers) from pachinkoplanet.com. Just looked and the bumpers you used to be able to get singly now seem to only be available in a kit.

  18. #11
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    7
    Thanks
    13
    Thanks Received
    8
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    I just ordered the bumpers, grommets, and a light kit from PachinkoPlanet. I can’t wait to get them.

  19. The following user says "Thanks" to dghodge


  20. #12
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    7
    Thanks
    13
    Thanks Received
    8
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Oh, and 500 balls will be delivered today!

  21. The following user says "Thanks" to dghodge


  22. #13
    Tokie Owens Traveller's Avatar
    Join Date
    Jun 2018
    Location
    Idaho
    Posts
    11
    Thanks
    0
    Thanks Received
    23
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    I ordered lights, bumpers and the crown stickers for the tulips from there on Monday. No shipping notification yet, hope they show up.

  23. The following user says "Thanks" to Traveller


  24. #14
    Tokie Owens dghodge's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    7
    Thanks
    13
    Thanks Received
    8
    Groans Given
    0
    Groaned 0 Times in 0 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Home Depot and Lowe's didn't have 1/8" plexiglass. Michael's did but it's coated so it's $40. I bought two of these from Amazon for $30 and they fit great. Now you can really tell how cloudy the old one is. And it is not as loud with the two layers.

    SIBE-R PLASTIC SUPPLY - CLEAR ACRYLIC PLASTIC PLEXIGLASS SHEET - 1/8 16"X16"

    https://www.amazon.com/SIBE-R-PLASTI...F8+16%22X16%22

  25. The following user says "Thanks" to dghodge


  26. #15
    Tokie Owens machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    14
    Thanks
    2
    Thanks Received
    48
    Groans Given
    0
    Groaned 1 Time in 1 Post

    Default Re: Pulled the old Nishijin out of the garage

    Menards has plexiglass sheets. At least mine does.

  27. The following user says "Thanks" to machgo


  28. #16
    Kungishi CarlW's Avatar
    Join Date
    Feb 2011
    Location
    Sugar Grove, Illinois
    Posts
    1,443
    Thanks
    2,146
    Thanks Received
    3,158
    Groans Given
    0
    Groaned 8 Times in 8 Posts

    Default Re: Pulled the old Nishijin out of the garage

    Quote Originally Posted by dghodge View Post
    Home Depot and Lowe's didn't have 1/8" plexiglass....
    It's ok if the plexiglas is a little thicker or thinner than 1/8"; also ok to use real glass! I like the sound better and the play (bounce).

    At the parlor, there would have been two pieces in your machine, get one of each (glass and plexiglas) and see which one you prefer on the inside track.

  29. The following user says "Thanks" to CarlW


Similar Threads

  1. Get it now before it's pulled.
    By FTKServices in forum eBay - General Auction listings
    Replies: 8
    Last Post: 12-04-2007, 10:29 AM
  2. Finally pulled the trigger guys!
    By trout16 in forum Model Talk
    Replies: 45
    Last Post: 05-25-2006, 02:55 PM
  3. Ebay pulled auctions
    By Davis in forum eBay - General Auction listings
    Replies: 2
    Last Post: 06-16-2005, 03:16 PM
  4. 1 Spin Luck Pulled
    By pachitom in forum Model Talk
    Replies: 3
    Last Post: 05-14-2005, 10:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •