Sharing some new cabinet ideas - input welcome

[Mike Briggs]

IMG_9296.jpgIMG_9297.jpgIMG_9298.jpg

The customizable part I do is to change the height of the part so that it hovers right above the ball hopper, and does not go over the top of the frame once attached, so it can be inserted into a cabinet after it is put on the machine. Also, if you wanted to use it with something other that 1/2 inch pipe, that would have to be modified, which is more complicated that just changing the height of the attachment area. The purple post does indeed straddle the hopper, then I just secured it with tape so it won't slide along the hopper. I don't have any vintage machines, just modern, but from what I have seen it should work there as well. On the down side, it takes 25 hours to print one!