Playfield replacement

[Tink]

Once you've got all the back parts removed. I just pull the staples and cut them off flush to the back with side cutters. Then pry up the track on the front. Use 20 ga SS wire for replacement.

[mxfaiman]

Once you've got all the back parts removed. I just pull the staples and cut them off flush to the back with side cutters. Then pry up the track on the front. Use 20 ga SS wire for replacement.

Feed the wire through the holes, twist it up good. Staple it down, give a few taps with a hammer to set in the wood, then smear with wood glue. Overkill, probably. But I want these to last another 40+ years.