Results 1 to 8 of 8

Thread: Meiyu Jan Ball

  1. #1
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,971
    Thanks
    1,257
    Thanks Received
    1,455

    Default Meiyu Jan Ball

    My next project, changed out the transformer, replaced all bulbs (only 2 worked and most of the rest well weathered or missing). Repaired main board.

    Working mostly, just need to figure out the scrolling top lights that should work with the stop button on the lower right.

    Very busy machine and many many win possibilities.

    Missing cap on the small upper left circuit board, hoping I can choose the correct one and it scrolls the lights.

    Inside.JPGJan Ball.JPGJan Ball 1.JPG

  2. The following 8 users say "Thanks" to Tink


  3. #2
    Eye Shooter gooilers's Avatar
    Join Date
    Feb 2014
    Location
    Alberta
    Posts
    520
    Thanks
    355
    Thanks Received
    212

    Default Re: Meiyu Jan Ball

    Very cool! Are you planning a conversion to LED's? Hopefully you can get it fully functioning.

  4. The following user says "Thanks" to gooilers


  5. #3
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,971
    Thanks
    1,257
    Thanks Received
    1,455

    Default Re: Meiyu Jan Ball

    Yes, I think LED'S are in order.

  6. #4
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Meiyu Jan Ball

    neat machine
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  7. The following user says "Thanks" to Moparformances


  8. #5
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,971
    Thanks
    1,257
    Thanks Received
    1,455

    Default Re: Meiyu Jan Ball

    Success cap installed and the top lights scroll for choice with the stop button.

    Max 10 pay, switchable inside 5 or 10
    Pays 1 on vertical line
    Pays 1 on horizantal line
    Pays 1 on diagonal line
    Pays 1 for center 4 lights, increments to 3 then 5 with the red pass through switch on the left
    Pays 1 for outer 4 corners, increments to 2 then 3 with the blue pass through switch on the right
    Pays max 10 for circle 1..16..3..13..5..7..9..15
    Bonus pocket above the matrix lights top left blue lens and changes to red lense beside it upon choice of 4..7..10 or 13 on the lower left.
    Crown pocket below matrix lights top center crown light and scrolls top lights for choice with lower right stop button. Crown pays 1.


    Now I can tear down for restoration.

  9. The following 6 users say "Thanks" to Tink


  10. #6
    Pachi Puro emmadog's Avatar
    Join Date
    Jan 2009
    Location
    U.S.
    Posts
    2,860
    Thanks
    967
    Thanks Received
    7,183

    Default Re: Meiyu Jan Ball

    nice job on the problem solving.
    jan balls seem to have more ways to win than most arrange ball machines.
    EM Pinballs & Arrangeballs

  11. The following user says "Thanks" to emmadog


  12. #7
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,971
    Thanks
    1,257
    Thanks Received
    1,455

    Default Re: Meiyu Jan Ball

    Completed pics. LED's in all but the matrix, another machine that switches the ground.Jan Ball inside.JPGJan Ball Complete.JPG

  13. The following 9 users say "Thanks" to Tink


  14. #8
    Eye Shooter gooilers's Avatar
    Join Date
    Feb 2014
    Location
    Alberta
    Posts
    520
    Thanks
    355
    Thanks Received
    212

    Default Re: Meiyu Jan Ball

    That's Sexy!

  15. The following user says "Thanks" to gooilers


Similar Threads

  1. Aripachi machine Isuzu Diamond Ball AKA Arrange Ball 2
    By cardwwi in forum Members Ebay Auctions
    Replies: 3
    Last Post: 01-03-2014, 06:32 PM
  2. Aripachi machine Taito National Richi Ball AKA Arrange Ball
    By cardwwi in forum Members Ebay Auctions
    Replies: 14
    Last Post: 12-24-2013, 02:10 AM
  3. Replies: 4
    Last Post: 09-26-2013, 09:32 PM
  4. Where in Japan might I find these 2 items please? A ball lifter + ball counter..
    By davidboy81 in forum Ball Lifters/Ball Management
    Replies: 11
    Last Post: 01-27-2012, 06:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •