Volume Mod

[ol-pachiman]

On a three speaker machine has anyone connected the two sound outputs together from the board to an L-Pod and out to the speakers.

This way you only have to use one L-Pod with a duel speaker connection, one connection for the top two speakers connected together and the other connection for the lower speaker.

[Si7]

Not 100% sure what you mean but if the amps are stereo for the top speakers you definately don't want to short left and right channels together on one L-Pad.

I might have misunderstood you though

[Tulsa]

I understood it the same way and yes, please do not short two different speakers together on the same l-pad.

[PachiFool]

Friends, don't let friends drink and hack pachislos.

Kevin

[PachiAddict]

You can however, use a dual L-pad on the same shaft (stereo L-pad) if you only want one control.

[monaghj]

Often in these three speaker systems, one of the speakers is a tweater and you arn't going to need to tone it down. Try disconnecting the other two and see if its too noisy. If its ok just put the Lpad on the two....

[slotter]

Also, if the speaker is facing the back, you probably won't need to control it. Just control the front two and you'll probably be satisfied.